After power fail I try to start Avamar (v.5 single node). Run commands as Admin user:
ssh-agent bash
ssh-add ~admin/.ssh/admin_key
dpnctl start
I see:
....
dpnctl: INFO: Starting MCS...
dpnctl: INFO: To monitor progress, run in another window: tail -f /tmp/dpnctl-mcs-start-output-15595
dpnctl: ERROR: error return from "[ -r /etc/profile ] && . /etc/profile ; /usr/local/avamar/bin/mcserver.sh --start" - exit status 255
....
When I start separately
dpnctl start mcs --verbose
....
syntax error at line 1, column 0, byte 0:
Demand Backup" version="1"/> 1310148173066 APPLICATION INFORMATION PROCESS MCS:BS Activity completed successfully. \N \N \N \N /clients
^
675 2011-07-08 18:45:02.661 22403 1310150702661 SYSTEM INFORMATION OK MCS:DPN_Proxy Console server data was saved to server successfully. \N \N \N \N /
at /usr/lib64/perl5/vendor_perl/5.8.5/x86_64-linux-thread-multi/XML/Parser.pm line 187
/bin/cat /tmp/dpnctl-get-mcs-status-output-16903
[ "/bin/cat /tmp/dpnctl-get-mcs-status-output-16903" exit status = 0 ]
Demand Backup" version="1"/> 1310148173066 APPLICATION INFORMATION PROCESS MCS:BS Activity completed successfully. \N \N \N \N /clients
^
675 2011-07-08 18:45:02.661 22403 1310150702661 SYSTEM INFORMATION OK MCS:DPN_Proxy Console server data was saved to server successfully. \N \N \N \N /
at /usr/lib64/perl5/vendor_perl/5.8.5/x86_64-linux-thread-multi/XML/Parser.pm line 187
- - - - - - - - - - - - - - - END
dpnctl: ERROR: error return from "[ -r /etc/profile ] && . /etc/profile ; /usr/local/avamar/bin/mcserver.sh --test" - exit status 255
.....
How I can solve this problem? May be I can reset configuration to empty state and reconfigure all schedules? I already try restore to checkpoints but result same.
I think better you open the support case, before worsen your problem. But if you don't have problem reseting your configuration and losing backups, you can find some articles in KB for do that.
I was configuring the vmware integration to turn off certificate Authentication and after I was done from editing the mcserver file the MCS didn't start and gave me the same error.
is there is any way to reconfigure or rebuild mcserver file.
I managed to solve this issue, I created a new virtual Avamar with the same version 5.0 and compared usr/local/avamar/mc/pref/mcserver.xml and I found an (ignor) syntex at the begining of the file (open with winscp), I removed this sentyx and tryed to start the MCS service and it worked fine.
if anybody need any further clarification please ask.
Luis_Rogerio
116 Posts
1187
0
Posted July 28th, 2011 06:00
Hi,
I think better you open the support case, before worsen your problem.
But if you don't have problem reseting your configuration and losing backups, you can find some articles in KB for do that.
Regards.
Luis Rogério