Please for your assist what I missed, but for some reason the options about the hz of my monitor are lost and now it is shows only 60/100hz. I'm totally sure that before it was able to chose from 144/165. What it was changed?
the connection from your VGA adaptor to the monitor has to support the required hz above. if you are using HDMI cable you need to switch to VISA DP++ and if that option is not supported then think about USB-C. if not DVI-D.
eliminate one problem at the time.
switch to a cable that support high performance mentioned above, do not use one side hdmi to dvi etc.
check drivers, go to device manager if your system has Q-Course graphics such as your will see Nvidia #model, below you will also see another Intel graphics, this is Q-Course and not the best but should support above 120 or 140hz.
if your monitor has a disk CD that came with it, it has a driver OEM from manufacturer.
I installed the last firmware, my cable is capable for what is needed, as before I managed to setup the monitor to runs at 144hz, maybe since a few of the last updates for the Nvidia those options is not available anymore.
I see you are using DP was this same DP cable used before when you could view 144hz? also what is the model of your monitor, the refersh rate could be changed arbitrarly to higher rate which someone not suppose to. check your model number or serial number with company and see what the specs offer 100 or 144, I have never seen 100 its usually 59, 60, 120, 144, 160, .... the solution would be completely remove all nvidia drives, also in the apps remove all nvidia control panels, remove nvidia Gforce experience, cuda, any other drivers you have must be removed. if you have intel built in GPU with Q-Course which i hope this is not the case, remove all intel drivers. then obtain original OEM drivers only not windows driver, install them and see if your monitor offers 144. all external devices have to be removed before starting and finishing procedure. go to computer management -> device manager -> view all hidden devices, if you have hidden monitors or display adaptors you need to uninstall them as well before rebooting.
customized resolutions will work as long as they are supported, once you run directx based applications that utilize the GPU they very likely to crash! I suggest you use what your video card options / display offer.
@R1d3rBul I have the same monitor, I can set 165 Hz no problem. As I mentioned before, you have to set the refresh rate correctly from within Windows, not the Nvidia control application.
You don't need to create any custom profiles to run that monitor at 165 Hz as it natively supports up to 165 Hz refresh rate.
I looked at the monitor that your listed, pretty nifty specs. so it should support whatever case you trying to use it for. however this model does not support above 165hz at native resolution. which is 4k display and assuming its a curved display correct me if I am wrong!
the number one steps I would take before shopping, make sure your nvidia drivers are up to date, use Gfoce experience to update the drivers.
make sure that there is only one connection between your nvidia card and the monitor, preferable VESA DP++ port, I have used in the past DP++ to DVI-D and works full resolution and 144hz on my own machine.
last I would borrow or buy a certified cable, most expensive devices "monitors" I have gotten from Nvidia, Asus, and Dell they come with a cable or two. check the boxes before you purchase anything. also identify the primary DP port on the nvidia you got, there will be multiple.
this sounds like a driver issue or cable version DP without++ have limited ability to transport signal, and the chip in your monitor will signal back to the nvidia card about max throughput it could handle, it will send a system interupt if nvidia try to send more bandwidth or you get exception errors at system level.
@R1d3rBul You are at 10 bit color depth according to that screen shot. It limits the refresh rate of the monitor. Switching to 8 bit will solve that issue.
JohnnyBa
2 Intern
•
15 Posts
•
3 Points
0
0
Posted February 1st, 2024 14:38
the connection from your VGA adaptor to the monitor has to support the required hz above. if you are using HDMI cable you need to switch to VISA DP++ and if that option is not supported then think about USB-C. if not DVI-D.
eliminate one problem at the time.
switch to a cable that support high performance mentioned above, do not use one side hdmi to dvi etc.
check drivers, go to device manager if your system has Q-Course graphics such as your will see Nvidia #model, below you will also see another Intel graphics, this is Q-Course and not the best but should support above 120 or 140hz.
if your monitor has a disk CD that came with it, it has a driver OEM from manufacturer.