UNSOLVED

CraigRGB

updated

8 years ago

C

CraigRGB

14 Posts

0

1886

September 21st, 2018 09:00

Aurora-R6, Restart results in blank screen

My Alienware Aurora R6 started doing something odd last week. When I select "restart" or when Windows 10 updates itself and restarts the computer it boots back up to a black screen. I hear the computer and the fans running but my monitor is black. If I push the power button on the computer to turn it off, then push the button to turn it on it boots up normally and there is no black screen. So it seems that the "restart" function of the computer doesn't work anymore. I have to chose "shut down" and the use the power button to power up. This causes a problem for some updates which require the computer to restart upon installation. Any suggestions much appreciated.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1669

    0

    Posted September 21st, 2018 10:00

    Is there something unusual about your monitor config?

    Just one monitor and it's connected to the lower Dedicated video card (in the PCIe slot) via DisplayPort?

    What does Windows Reliability report say about those Restarts?

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • CraigRGB

    14 Posts

    1652

    0

    Posted September 21st, 2018 12:00

    Thank you for your quick reply.  I have viewed the Windows Reliability report and there are no faults or application hangs, etc., or anything to do with restarts for the past two weeks that this has been happening.

    My monitor is plugged into one of the Alienware Aurora 6 Displayport slots and hasn't been moved since the day I set up the computer last summer.  The NVidia drivers for the video card are up to date and Windows Update is up to date.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1643

    0

    Posted September 21st, 2018 14:00


    @CraigRGB wrote:

    it boots back up to a black screen. I hear the computer and the fans running but my monitor is black.


    Answer above question, and also ...

    Have you ever let it sit there for 10 minutes and see if it eventually boots-up. Don't be impatient. 

     

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1638

    1

    Posted September 21st, 2018 14:00


    @CraigRGB wrote:

     

    turning off "Fast Start" I can now restart the computer and it will boot properly. 


    Yes, if you would have ever verified that the monitor was actually plugged into the Nvidia card itself, switching the "Fast Startup" option would have been my next suggestion.

    Glad you figured it out. 

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1644

    0

    Posted September 21st, 2018 14:00


    @CraigRGB wrote:

    1. Thank you for your quick reply.  I have viewed the Windows Reliability report and there are no faults or application hangs, etc., or anything to do with restarts for the past two weeks that this has been happening.

    2. My monitor is plugged into one of the Alienware Aurora 6 Displayport slots and hasn't been moved since the day I set up the computer last summer.  The NVidia drivers for the video card are up to date and Windows Update is up to date.


    1. Well, that's strange. If not the error causing the trouble, there should at least be an error about it not getting shut-down properly (getting forced-off with power button like that). 

    2. So you have an Nvidia card huh? So, are you sure you are using a DisplayPort on the lower Nvidia card itself and NOT one of the Aurora's ports for the on-board Intel card?

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • CraigRGB

    14 Posts

    1641

    0

    Posted September 21st, 2018 14:00

    I have waited waited for twenty minutes or so to see what would happen but still no image on the screen.  I tried connecting my monitor to a different displayport, but same result.

    I have found a work-around solution, however.  By changing the Power Settings to "Never Sleep" and turning off "Fast Start" I can now restart the computer and it will boot properly.  I'm not sure how this works, but it does so updates will restart and work correctly now.

    Thank you for your assistance.