Aurora R11, replaced fans but still noisy, out of warranty
I should have sent my Aurora R11 back when it was still under warranty right away as I have had this crazy spinning up of the fan noise since I got it. I thought it was normal till a friend of mine came over and told me otherwise, but alas my warranty ended in August and Dell doesn't want to return my request for purchasing an extended warranty so I took it upon myself to look for an answer.
Looking through numerous threads and youtube videos I seem to be having the same problem as many other users with the Aurora R11 2080ti, ridiculous fan noise spinning up for 3 seconds to full blast and then lowering itself for 3 seconds. So I replaced the two stock fans with two Corsair ML120 Pro fans. And I reapplied the thermal paste on the gpu with some ArticMX-4. Idling it is dead quiet, fantastic. But as soon as I boot up any game that even slightly uses some of the GPU the whole system just goes berserk just as before. It's every so lightly less loud but its doing the same spinning up and spinning down as before. I've updated my graphics card to the latest drivers, the bios to the latest bios.
I am at a loss for what to do. I just want to play some video games without having to put my headphones on and try and ignore the screaming fan noise spinning up and down over and over again. I've attached a snapshot of the fan you can see the fan speed spikes in the photo.
Ok what I did that seems to at least tempered the spikey fan noise is set the Thermal limit of the GPU to 82C in AWCC, then under thermals I made a smooth line curve for the fan to ramp up on both the top and front fan. That seemed to do the trick for the most part. Occasionally it ramps up really high but it doesn't fluctuate and spike all over the place like before. Thanks to everyones help, I'm still going to look into that water cooling solution for the GPU though, happily take any recommendations. I would love to have as quiet a PC as I could.
What’s your specs. Are you overclocking the cpu over 5.0ghz? Are you using one of the AWCC overclock options that maybe at 5.3ghz? Are you adjusting your fans properly?
I'm running an i9, 32gb of ram and the Nvidia GeForce 2080ti
I don't think I am overclocking anything at all. I'll attach a screenshot of the AWCC. The fans I installed seem to be working just fine and don't seem to be the ones spinning up like crazy. It seems like it's the fan on the Nvidia card itself?
I'd be happy to read up on how to adjust the fans properly though if I am doing something wrong. Anything I should specifically be googling? Cheers.
Since you are familiar changing out the thermal paste, you made NO mention of the CPU. Have you tried to clean and replace the thermal paste on the CPU? If the CPU thermal paste is not doing its job, the fans will kick into high gear to keep temps down.
Apologies that's a big typo/mistake in my post. I applied the thermal paste to the CPU not the GPU. I didn't take apart the graphics card at all. I also tested the fan on the gpu using msi afterburner to see if indeed the GPU fan is what is causing all this noise and it seems it is. Which brings me to my next question; what solutions are available to me for dealing with the noise coming from the GPU fan? Should I crack open the GPU and reapply thermal paste in there? I'm assuming those fans can't simply be replaced... Should I look into purchasing a new Graphics card entirely?
NO, do not take the GPU apart. What is the ambient temp where the PC is located. Have you checked your temps with HWMon? My Aurora R10 gets a little toasty where I live in Florida. What I do is open MSI Afterburner, and run the GPU fans at 40-45%. I open AWCC and select fan profile PERFORMANCE.That helps keep the temperatures in check. Once the temps come down, I run the AWCC fan profile Balanced and turn down the GPU fans.
You can also automatically run profiles for a particular game within AWCC by creating a profile. I chose to do it manually.
My R11 is raised on its own little platform off the floor and my office temperature is always cool. I checked the temps with the HWMonitor as you suggested. I didn't notice anything off, though the top fan and front fan would not show up in the HWMonitor. Watching the AWCC as I spun up a game I noticed the front and top fan speed were not speeding up even though the temperature was increasing on those fans. Somewhere around 21% and 11% respectively. My GPU fan on the other hand was going from 2500RPM all the way up to 5000RPM and and back and forth. I tried setting the fan speed to something like 80% in MSI Afterburner but even that wasn't enough, even with the additional speed it would still ramp up to 100 and then back down to 80. Adjusting the fan curve in AWCC to something crazy still didn't change the fact that the GPU fan was revving up either. Any more suggestions?
Yeah, those two fans are running too low which might explain the GPU fan ramping up. Go to the AWCC Home Tab and on the bottom row click on the Performance Fan Profile. You should hear the fans automatically spin up to around 30-35%. Let AWCC automatically do it.
If that doesn’t help you might want to replace the GPU paste.
That is why I let AWCC handle my fan speeds automatically. When I select Performance mode for the fans, the fans automatically spin up higher than the Balanced profile. I have seen them spin up even higher if the temps climb a little higher when playing games like Elden Ring.
Have you tried undervolting your GPU with afterburner? I had an R10 with RTX 3080 and doing it helped quite a bit with thermals and as a result noise. I didn't lose any performance.
Kokutouchichi
7 Posts
1412
0
Posted April 15th, 2022 22:00
Ok what I did that seems to at least tempered the spikey fan noise is set the Thermal limit of the GPU to 82C in AWCC, then under thermals I made a smooth line curve for the fan to ramp up on both the top and front fan. That seemed to do the trick for the most part. Occasionally it ramps up really high but it doesn't fluctuate and spike all over the place like before. Thanks to everyones help, I'm still going to look into that water cooling solution for the GPU though, happily take any recommendations. I would love to have as quiet a PC as I could.