Want to change from the original ssd (Intel ssdpemkf256G8) to a WD Black SN850 500GB M2 PCIe Gen 4. The interface of the M2 slot on the motherboard is PCIe 3.0x4 or PCIe 4.0x4, before and after Bios 2.1.0 update?
Also, the service manual is not clear about the actual speed of the slot. For some reason most of the slots run at half speed. It does not say if the M.2 runs at full speed, or if it's half speed. It only lists what type of drive it accepts size wise. 22 mm wide and either 30 or 80 long.It would not surprise me if the slot runs at half speed...
The PCI-Express X16 slot works at X8 lanes only.
The PCI-Express X4 slot 3 works at X2 lanes only.
One PCIe/SATA M.2 card slot for 2230/2280 solid-state Drive
It should work because any M.2/PCIe/NVMe SSD will work in that slot.
PCIe v3 or v4 doesn't really matter in this case (it's not like it's a video-card).
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
B550A (i.e., the R10 motherboard) generally should support PCIe 4.0 on one PCIe slot plus the M2 slot. Keep in mind B550A is a rebrand of B450, so it is AGESA enabled PCIe 4.0 direct to the CPU (hence, only the first x8 and the M2), as opposed to chipset enabled 4.0.
Also, keep in mind the x16 mechanical but only x8 electrical is a different aspect. That's separate from the issue of whether it supports PCIe 4.0 (which incidentally is twice as fast).
And to your question, I thought the literature referenced support for PCIe on the M2 for some time prior to the update, even as far back as initial release.
He is asking this specifically in reference to PCIe 4.0: PCIe 4.0x4.
The service manual does not specifically say 4x4. That's why I said it could be like most other slots on this board, who all seem to run at half the speed.
It makes me wonder if it is PCIe 4.0x4, or PCIe 4.0x2 ?
He's wondering PCIe 3.0x4,, or PCIe 4.0x4.
The answer is it is PCIe 4.0 according to the service manual, Question is what speed, x2 or x4?
Going by a third party program called HWiNFO64, it looks like this:
Video Bus: PCIe v4.0 x16 (16.0 GT/s) @ x8 (16.0 GT/s) for the video card, which is correct (version 4.0x8)
However, for the M2 slot it becomes more interesting:
It comes off a PCIe GPP bridge, PCIe 3.0 running at 4X, That would indicate PCIe 3.0x4 for the M.2 slot, not PCIe version 4.0.
Is there any official from Dell who can confirm what this bus runs at? PCIe Version and link speed?
If HWiNFO64 says "running at 4X", it would be 4X. you checked with a Intel SSD orginal? I think Intel SSD is a 3.0X4, so maybe when a SSD 3.0 is running on slot M2 Gen4, HWiNFO64 will give us this report?
Meanwhile, I will add a SSD WD SN750 M2 NVMe 1T at bottom PCIe slot with an adapter PCIe-M2 tomorrow.
markburv
2 Intern
•
569 Posts
6235
0
Posted February 1st, 2021 09:00
hi @calvados14000
If you have a Ryzen, the tech specs says PCIe is Gen4 in the Service Manual
If it is not a Ryzen, Intel have not done the PCIe Gen4 chipset yet.
I don't know if this means it will run at higher speeds or not than Gen3.