Aurora R10 Ryzen, NVMe PCIe card displayed once then disappeared
Hi,
I am using a new Alienware Aurora R10 Ryzen edition with Ryzen 5800x and 6800XT. I put a Inland Platinum NVME M.2 PCIE card using a RIITOP adapter card with heatsink into my PC. It showed up for a day however disappeared after that.
I have tried taking it out and reseating it back in. Didn't work for me. While browsing the forums someone had mentioned putting the PC to sleep and then waking it back up shows the drive for them. Guess what, that worked.
Sad part is I want it to just work. The workaround allows me to use the drive, however this seems to be like a band-aid solution.
"Sometimes this mechanism cause a bit trouble during power transitions, specially during sleep. So it may be wanted to turn the Link State Power Management off, if necessary."
OS was not installed this drive. I cannot see the drive in bios because as soon as I restart it stops showing up. Then I put the PC to sleep and wake it up to use it.
I will try switching the OS drive in the adapter, and move the Inland drive to the m2 slot.
- Tried this, the system didn't even boot up.
FYSA, I have been using this drive in my Alienware R3 15 for 3 months without any type of issues. I just took this out of there and used it in the Aurora with the adapter.
All power plans are defaulted to sleep HDDs after 20mins, sometimes this does not help certain systems, this may be your case, can you @Vampyrchief check this setting too please?
@r72019 I did try moving it into a different slot. And the PC didn't even boot up. The second card doesn't even show up in BIOS.
I have asked for a replacement of the same one for now. If that doesn't work, I will order a new one. Any suggestions on which one?
@markburv I have changed the settings as you described. Nothing changed. Still have to put the PC to sleep and wake up to use the hard drive.
I noticed that whenever I wake the PC up to use the NVME PCIe Card, system notification alerts me that I need to decide what to do with removable media.
" I did try moving it into a different slot. And the PC didn't even boot up. The second card doesn't even show up in BIOS."
You moved the inland drive plus adapter combo to a different pcie slot and the computer didn't even boot? And when can boot the drive is not visible at all in bios or windows until after you wake from sleep. If so, a boot partition may be installed on the inland drive and possibly there's a conflict with the boot drive in your m2 slot. This happens sometimes if windows is installed when more than one drive is connected to the pc, or the drive was used as a boot drive in the past. Or if you bought it preowned, or in other than a new sealed box. If so, you would need to first clean and then format the drive.
My other thought may be an issue with the adapter or drive. Either driver or firmware related.
r72019
8 Professor
•
5344 Posts
875
1
Posted February 10th, 2021 07:00
Try removing and then reseating the SSD in the adapter.