The problem is the cloning process. I would advise you to google cloning a SSD... it is a little time consuming and can be a headache. I tried cloning to a Samsung SSD using a USB adapter and it did not work. I had to do it a different way.
As @kanadian-kaos indicated, any brand should work, but certain brands like Samsung and Crucial recommend that SATA operating mode be set to AHCI. AHCI is not required but recommended and in the case of Samsung, Samsung Magician and the Samsung NVMe driver, while not required, will not load in RAID mode. Your XPS 8930 has the BIOS and Windows installed in RAID mode.
You did not indicate how you wish to make the upgrade, whether you want to clone your existing SSD or reinstall Windows. Cloning is less work but because you only have a single M.2 slot it is a multi-step process even if you use an M.2 to USB adapter. Using something like Macrium Reflect Free Edition, you would create images of all the partitions on your 256GB SSD to your hard drive (you didn't mention you have one but I assume you do). You would also use Macrium Reflect to create Rescue Media to a USB drive or CD/DVD. You would then replace your 256GB SSD with the new SSD and then boot from the Rescue Media and restore the images of the partitions (in the same order as on the 256GB SSD) to the new SSD. I would restore the images one at a time and with the C partition, I would expand the partition since now you have more space. When finished, you should boot from the new SSD. At this point, you have the option of changing SATA operating mode to AHCI. Here is the procedure: http://triplescomputers.com/blog/uncategorized/solution-switch-windows-10-from-raidide-to-ahci-operation/
Note that SATA operation in the BIOS is not changed until step 4. If something goes wrong, you have the images and the 256GB as a backup.
Using an M.2 to USB adapter you can clone directly from SSD to SSD skipping the steps of creating and restoring images.
See page 82, 'First create rescue media' and click on the link, 'Creating rescue media', to create Rescue Media.
See page 82, 'Imaging disks' and click on the link, 'Creating a backup of your computer'. I suggest you create an image of each partition separately instead of one image of all the partitions. This way you can restore the images one at a time. You check the box of the disk and partition you wish to image.
See page 88, 'Restoring images' and click on the link, 'Restoring an image from within Windows' except as the Note on page 89 says you will not be able to boot Windows with your new SSD but will be booting and using the Rescue Media. On the linked page, under 'Moving and Resizing the restored partition' you will see a link to 'Modifying restored partition properties' which will show you how to modify the size of the target partition. You will want to do this for your new C partition.
The process is safe because you are not modifying your existing SSD. Your SSD will be removed from your PC when you start restoring images. If there is a problem, you can always put your old SSD back into your PC. I suggest you test your Rescue Media before removing your old SSD in case there is a problem and you have to create it again.
* Notice : The driver IS REQUIRED for Windows 7, Windows 8.1 and Windows 10. Recommended minimum system configuration is Intel Haswell Refresh Processor, 2GB RAM, 50MB free disk space and UEFI Bios v2.3.
kanadian-kaos
18 Posts
2778
0
Posted November 2nd, 2020 06:00
Any brand will work.
The problem is the cloning process. I would advise you to google cloning a SSD... it is a little time consuming and can be a headache. I tried cloning to a Samsung SSD using a USB adapter and it did not work. I had to do it a different way.