New here so this is my first post so hello everyone! Been lurking for about a year now but never joined until tonight. The reason I joined you ask? This dreaded "blinking amber power button of death" that has cursed more than just a few systems. It honestly reminds me of the red ring of death for Xbox. Well my system was infected later this evening and I have done everything recommended in these forums in an attempt to revive it besides calling support because today is Sunday. Will call first thing in the morning. This issue seems very prevalent among these systems after all the research I've done. Everything's fine and then all of the sudden your computer just shuts down and there's no remedy (correct me if I'm wrong) and that really annoying when your life and finances are dependent upon it. Just thought I should make this post to, I dunno, make the issue known? Could this be a defect in our systems? Am I mad I can't use my computer right now? Yes.
Dell XPS 8910 and I bought it used last year so I'm not completely sure of the manufacture date; however I do know its in the 2015-present model range (I believe 2017). So I found out that my power button is blinking 4 times and then pausing. That corresponds to a "memory or RAM failure". I have the original RAM (2 x 4GB) plus an additional pair of G.SKILL Ripjaws V Series (2 x 8GB) for a total of 24GB RAM. The G.SKILL RAM chips are in DIMM 1 and DIMM 3, and the original RAM chips are in the DIMM 2 and DIMM 4 slots. Up until yesterday it has worked absolutely flawlessly and it was great having so much RAM at my disposal. After figuring out about the RAM error I decided to play with the chips and switch around the slots they are in. Nothing worked while using all 4 chips. Finally I got it to boot when I only had RAM chips in the DIMM 1 and DIMM 3 slots leaving 2 & 4 open. It doesn't matter if it's the G.SKILL or original RAM in slots 1 & 3, but it seems like those are the only two that are recognized. So now my computer works perfect but I have less RAM and that's annoying. Does anyone know why the motherboard will not recognize anything in the DIMM 2 & 4 slots, and why it won't even boot if I put anything in them? Is this indicative of needing a new motherboard if I want to utilize all 4 RAM slots??
First of all, look at the picture on page 17 of the service manual and make sure you know how the DIMM slots are numbered. If the CPU is on your left, the slots are DIMM3, DIMM1, DIMM4, & DIMM2 from left to right. You can also look at the markings on the motherboard next to the DIMM slots (XMM3, XMM1, XMM4, & XMM2). DIMM1 & DIMM2 has white securing clips and DIMM3 & DIMM4 have black clips. Ignore Table 2 and the note on page 78. It is wrong. Memory should be installed in pairs in the slots with similar color securing tabs (either DIMM1 & DIMM2 or DIMM3 & DIMM4). Download the app CPU-Z and look at the Memory and SPD tabs in the app. In the SPD tab you will need to select the slots that actually have DIMMs installed. Currently, if you have the slots right your memory is installed incorrectly and you are probably running in single channel vs. dual channel mode.
So after trying all different configurations of RAM chips it still won't boot as long as all 4 slots are occupied. I tried 8-4-8-4, 8-8-4-4, 4-8-4-8, and 4-4-8-8 (with DIMM 1 being the first # and DIMM 4 being the last #; numbers represent GB). No luck. The only condition that will allow my system to boot is if there are only 2 RAM chips in the DIMM 1 & 3 slots. Both the original RAM and the G.SKILL chips work as pairs in those spots and I currently have the G.SKILL ones in there to give me 16GB. However, if I then want to add the remaining two chips into DIMM 2 & 4 slots it will not boot. As a matter of fact it doesn't matter what order the 4 chips are in, as long as 4 are in there in doesn't want to boot. If someone knows of a different order I can put these chips in please let me know. I've been running these chips according to Table 2 - 24GB (which you said is wrong?) for the last year with no issues at all, and my task manager page had always recognized me having 24GB of RAM. I wonder why there's an issue now?
Thanks for the advice but it still didn't work. If my system boots perfectly with only 2 sticks in the DIMM 1 & 3 slots then the CMOS battery wouldn't be the issue would it? Can someone explain what slots I should put these RAM chips in?? I swear I've tried all the different combinations but maybe I'm missing one. I have a pair of 8GB and a pair of 4GB chips for what it's worth.
I changed out the CMOS battery as a preventative measure and it made no difference. Still experiencing the same issues of only booting with RAM in DIMM 1 & 3
So in the meantime I have everything functioning properly while running off just the 2 x 8GB G.SKILL RAM chips. Since I got it running I downloaded that CPU-Z app and here are the readings for it's Memory and SPD with the current 'downgraded' setup:
Could the original RAM be toast? I am considering purchasing two more G.SKILL so that all four chips are the same, and I'm curious to see if that would solve my issue.
I've been running these chips according to Table 2 - 24GB (which you said is wrong?) for the last year with no issues at all, and my task manager page had always recognized me having 24GB of RAM. I wonder why there's an issue now?
Table 2 is wrong because the matched pairs should be DIMM1 & DIMM2 (white securing tabs) or DIMM3 & DIMM4 (black securing tabs). The only line in Table 2 that is correct is the line for the 24 GB configuration, the 32 GB & 64 GB configurations do not matter because all the DIMMs are the same size and the 8 GB & 16 GB configurations are wrong. Also the note is wrong, it should be DIMM1 and DIMM2.
We can't see your pictures yet until they are approved. Yes, it should say you are running dual channel, but you are not running dual channel because your RAM is in two separate channels (DIMM1 & DIMM3). If the RAM was in DIMM1 & DIMM2 or DIMM3 & DIMM4 then it should say dual channel.
I may have additional comments once I can see your pictures.
If PC was working OK and then you started seeing the 4 blink (RAM) code beforeyou switched RAM modules around but clearing BIOS didn't help and each pair works separately, there are only 2 conclusions, (1) the motherboard failed and won't work with 4 modules, no matter what modules are in what slots.
Or, less likely: (2) RAM on the add-in video card failed (assuming you have an add-in video card). So repeat the numbered steps posted above, but after #3, remove the add-in video card. Then do #4-#5 and connect your monitor to either the onboard HDMI or DP video port.
Mary G
6 Operator
•
20095 Posts
3350
0
Posted April 1st, 2019 13:00