UNSOLVED

BIC2

updated

6 years ago

B

BIC2

1 Rookie

•

8 Posts

0

391

September 2nd, 2020 08:00

XPS 8900, Win10 update, 1. powers off instead of sleeping; 2. disabling WiFi card causes BSD

XPS 8900. Did "Feature update to Windows 10, version 2004" as well as .NET Framework & Adobe Flash updates on 8/29/20.  Two issues after updates.

1. Instead of going to "Sleep" either manually or with preset configuration, PC turns off.

2. To get 5GHz WiFi, I use a USB network adapter and disable the built in WiFi through Device Manager.  After update, if I disable built in WiFi, Win10 crashes BSD.  I can workaround by going to WiFi settings and turning "WiFi" OFF and "WiFi 2" ON.  Device Manager still shows it enabled, but guess this configuration works.  Would still like to disable in Device Manager to ensure no conflicts.

  • 68cutlass

    192 Posts

    296

    0

    Posted September 2nd, 2020 14:00

    Not sure about the sleep issue... is BIOS and drivers, incl video, up to date?

    On the wifi, you can disable it in the BIOS. Have you tried that?

  • BIC2

    1 Rookie

    •

    8 Posts

    292

    0

    Posted September 2nd, 2020 15:00

    Good question.  Windows Update shows no new drivers available.  Dell Update app shows no updates available.  Last week, it showed many updates available.  I did a few, including the BIOS.  I did the BIOS separately.  But now, the several other updates are not showing as available.

    On the web based Dell driver update page, also says no new drivers needed.  Down below, it shows 17 available drivers, including the BIOS.  I assume those are all possible drivers for my PC should I want to re-install one.

    Best I can tell, everything is up to date.

  • 68cutlass

    192 Posts

    287

    0

    Posted September 2nd, 2020 15:00

    I'm not much help on the sleep issues. I'm old school and leave my machines on 24/7. I installed 2004 on my 8900 and didn't have any issues for a week other than the windows bugs with 2004. I did have wireless and bluetooth disabled in the BIOS before updating. Curious if that would solve your BSOD