XPS 8700 Internal HDD shows as BD-Rom and is inaccessible
Used a utility called Wincdemu to mount an image of a DVD. After using, the one standard SATA internal HDD (the original drive the machine came with) installed in the machine is now showing up as a BD-ROM drive in both File Explorer and Disc Management.
I have so far tried:
- Uninstalling the utility. It uninstalled cleanly but did not correct the issue.
- Changing the drive letter. No difference after reboot
- Uninstalling the drive. No difference after reboot.
Is there a way to correct this issue and have the drive recognized properly again? I am willing to format the drive if necessary, there is nothing critical on it, but first I would need to get Windows to recognize it properly.
Sounds like it left a changed remnant ... like a system .ini file or maybe in the Registry.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
SysInternals AutoRuns might point to something useful (but be careful using that tool).
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
@Tesla1856 I'm not sure my first post was clear. It's not just displaying the drive as a BD-Rom, it's identifying it as a BD-Rom, it's not identifying it as a hard drive with available space. I have done several searches to try to find a post about a similar issue and a fix, but so far nothing I have found has resolved the problem.
another internet reported cause of hdd appearing as dvd is bad hdd, but since OP did not report very long boot time and issue occurred after virtual cd mounting, likely cause is messed up partitions.
@redxps630 Not sure this would be a good route for me to go, as this device is not my boot drive and was simply being used for file storage. The PC is running fine in spite of the issue with this drive and boots quickly, my boot drive is an SSD.
Perhaps if you dis-connected your boot drive and ran something like System Rescue and wiped/formatted or deleted the problem drive,then reboot into normal windows?
ELSE .............
The safest fix is usually to remove WinCDEmu’s virtual-drive leftovers, reboot, and then reassign the real HDD’s letter back to it. WinCDEmu has a cleanup utility, and Windows also has built-in tools for clearing stale drive-letter mappings such as mountvol /r and diskpart drive-letter changes.
What likely happened
WinCDEmu installs a virtual CD/DVD driver and can leave behind a stale mount-point or drive-letter mapping after a bad unmount or driver glitch. That can make a normal volume appear as a BD-ROM device in File Explorer and Disk Management even though the physical disk itself has not changed.
Fix it in order
Uninstall WinCDEmu from Apps & Features or Programs and Features.
Run the WinCDEmu cleanup utility wcdcleanup.exe, if you can get it from the vendor’s cleanup link, then reboot.
Open an elevated Command Prompt and run mountvol /r, then reboot again; this clears stale mount-point and registry entries for volumes no longer properly tracked.
Open Disk Management, find the HDD, and use Change Drive Letter and Paths to assign a normal letter such as D: or E:.
If Disk Management will not fix it, use diskpart, list volume, select volume <n>, then remove letter=<letter> and reassign the correct one.
If the letter still looks wrong
Check Device Manager and BIOS/UEFI to confirm the drive is still detected as a SATA hard disk rather than an optical device. If the mapping remains corrupted after cleanup and reboot, a Windows restore point or registry repair of HKLM\System\MountedDevices may be needed, because persistent drive-letter assignments are stored there.
I was unable to obtain a copy of wdcleanup.exe, it doesn't appear to be available anymore, although it is surely needed with the amount of files it leaves behind. I did attempt to manually clean up as much as possible, including the registry entries and drivers for BazisVirtualCD, which is installed a left behind by this utility.
I ran mountvol /r - no change after reboot.
I tried running diskpart, the drive is not listed.
The drive does show up in the BIOS, but not in Disk Management, I even tried moving the SATA cable to a different connector on the motherboard, no change.
Just for fun, I ran the Dell BIOS utility and it came up with the following:
Error Code 2000-0151
Validation 73381
Msg: Hard Drive 0 - S/N Z1D8QT62, incorrect status = 32
No additional sense information
I do not have an existing restore point to work from, is there a way to repair things manually? The device does not seem to show up under mounted devices in the registry.
Tesla1856
10 Wizard
•
18086 Posts
•
71947 Points
0
0
Posted May 17th, 2026 00:26
Sounds like it left a changed remnant ... like a system .ini file or maybe in the Registry.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.