UNSOLVED

butchiesmom

updated

19 years ago

B

butchiesmom

10 Posts

0

12687

May 6th, 2008 14:00

Safely Remove Hardware wants me to remove my hard drive

It doesn't seem to bother the computer much but it bothers me.

 

The Safely Remove Hardware has been up on my toolbar for months.  I have a Dell Dimension E521, running Vista Home Premium, 32 Bit.  I use Panda Antivirus and ran Castlecops's  Malware Removal Program.  The results ended up with no report for the last antitrojan program.  I open it and click the Close button, even in Safe Mode, it makes no difference.

 

 This is the message I received for the Safely Remove Hardware: 

 

Select the device you want to unplug or eject, and then click Stop.  When Windows notifies you it’s safe to do so unplug the device from your computer.

 

Hardware devices:

 

USB Mass Storage Device

             Lexar JD Secrue II + USB Device

                        Generic volume – ( F: )

WDC WD25 00JS-75NCB3 SCSI Disk Device

            Generic volume – ( D: )

            Generic volume – ( C: )

Optiarc DVD+-RW AD-5170S SCSI CdRom Device – ( E: )

 

USB Mass Storage Device at Port#0008.Hub_#0002

   

As you can see, I can remove (and do) the flash drive, no problem, but disconnecting the other drives, especially the C: drive, might be problematic.  I've had the flash drive disconnected from the computer but this problem started before that.

 

In addition, I constantly receive an error message which says my back up for the D: drive has failed.  This has been going on much longer.   I can't configure it because there's no options for me do so.   Do I really need this drive?  I'm not sure but is this a physical drive or merely a partition on the hard drive?  This is the most annoying problem I have since the windows pop up for it several times a day.  Two windows, in succession, several times a day.  I'm in IE7 and Word 2002 most of the time since I'm writing a novel and working on a web site.

   

I contacted Dell for the Safely Remove Hardware problem and found my E: drive wasn't working when they asked me to back up my files and I couldn't burn to cd or dvd.  Fortunately, that was fixed but Dell informed me that the SRH problem was a software problem.

 

I've defragged both my c: and d: drives and  did a disk clean on both of them, they’re fine as far as I know.  I have a HijackThis log if that will help.

 
Message Edited by butchiesmom on 05-06-2008 11:17 AM
  • butchiesmom

    10 Posts

    1050

    0

    Posted May 6th, 2008 15:00

    I think what annoys me is that I can't get that icon from leaving my taskbar, lol.  

     

    Also, the popup windows for the d: drive (backup) which pops up at any time.  If I could, I'd just adjust it to stop backing up period, it's half full as it is.  It has a 9.9 gb capacity and has used 4.96 gb.  Explorer properties label it as a recovery drive.  Is this really necessary?  I can't access it if necessary since it has a freakin password no one (whoever put it in) thought to include the password for it when it was shipped to me, lol.

     

    This is one of the messages I get.  I went to Windows Explorer to get it to pop up.  There's another message which usually pops up right after I close this window, but since I used WE to get the first one to show, of course the second didn't, lol.

     

    The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.  (0x80070422)

    Please close backup and try again.

     

    I would like to be able to stop this window from popping up in the first place.

    Message Edited by butchiesmom on 05-06-2008 12:35 PM
    Message Edited by butchiesmom on 05-06-2008 12:35 PM
  • Rebel9

    1 Rookie

    •

    2856 Posts

    1050

    1

    Posted May 6th, 2008 15:00

    There is actually nothing wrong with your "safely remove hardware". SATA II drives ARE hot-swapable and so Windows is showing these drives (along with the other devices). I don't know of any way to remove the SATA drives from the list. Possibly someone else has a registry hack?
  • 1050

    0

    Posted May 6th, 2008 17:00

    The D drive should be your Factory Image Reinstall partition that would allow you to send the computer back to the "as shipped" stage and can be very useful and time saving if you ever need/want to start all over again and not have to find/load chipsets, and drivers for many hardware devices on your computer.  It will also install all shipped software that came with it further saving time.  I recently used it and even with installing Sp1, was done in around an hour.  I would suggest keeping it as it doesn't take up much space and might come in handy down the line.
  • butchiesmom

    10 Posts

    1050

    0

    Posted May 6th, 2008 18:00

    That's good to know and thank you for explaining it, but PLEASE!!!!, I'm growing, wait I take that back, I'm tired! of clicking close on the error messages for it, lol.

     

    I just want those messages to go away and would like to know how to accomplish it, lol.

  • butchiesmom

    10 Posts

    1050

    0

    Posted May 6th, 2008 20:00

    It's not that I'm trying to back up to the D: drive.  It's just that those messages pop up while I'm working, telling me IT can't back up to the drive.  What I have noticed, though, I have not had those messages pop up at all today except when I forced it to!  Hooray!  lol  Maybe the blasted thing has decided to resolve itself, lol.  I checked out the backup thingy jigger and there's no option for disabling it.  I have no idea why I started getting those error messages but maybe they have finally stopped.

     

    Anyway, thank you for your assistance.  I do apppreciate it!

  • 1050

    0

    Posted May 6th, 2008 20:00

    If you are trying to backup to the "D" drive that can't be done as it is the afore mentioned Restore image partition.  You should disable backup and your problem should go away.  You would need to either install another onboard hard drive, copy to a dvd writer or an external HD as a backup. 
  • beversoll

    2 Intern

    •

    301 Posts

    1050

    0

    Posted May 7th, 2008 00:00

    I had a similar problem with that icon, so I am not sure if this helps, but check this link out.  Dell Tech support remotely logged into my computer to find the solution.  During the procedure he clicked to remove all of the listed drives, and nothing happened.  I restarted and the same icon appeared with the same drives listed.  I would not recommend trying this because the tech support assured me if it ruined the computer Dell would replace it. 
    Message Edited by beversoll on 05-06-2008 08:22 PM
  • Garboesque

    24 Posts

    1050

    0

    Posted May 7th, 2008 16:00

    I have had the same problem (Safely Remove Hardware icon),twice, on my E521 - on both occasions it was caused by a dodgy updated Nvidia driver for the SATA drive. It never seemed to create a problem other than the irritating notification to safely remove it.

     

    I solved it by rolling back the driver for the hard drive and then hiding the update next time it is offered by Automatic Updates. If you have not yet installed SP1 then you will need to re-install that driver to get it to be offered by Windows AU (which is why I had the problem twicwe!).

     

    Hope this works for you.

    Message Edited by Garboesque on 05-07-2008 12:48 PM