Command Update 4.0.0 no longer has the option to prevent an automatic reboot
In previous versions of Command Update (namely v3.1), there was an option to prevent automatic restarts.
Here is the wording from the user guide: Optionally, If you want Dell Command | Update to automatically restart the system after installing updates, select Automatically restart system (when required).
We use command line interface to configure the settings when installed. To prevent automatic restarts, we use the command line: /configure -scheduledReboot=0.
Version 4.0 was released a couple weeks ago and DCU is automatically updating our machines to this new version. The problem is that the option to prevent an automatic restart is now gone with the maximum time before reboot being one hour.
From the user guide: After updates are applied section provides an option to select the time interval to automatically perform a reboot if the updates installed require a system reboot. The available options are five minutes, fifteen minutes, thirty minutes, and one hour. The default value is set to fifteen minutes.
For computers previously configured to never reboot, they are now switched to one hour. The command trigger returns an error as 0 is no longer an option.
I'm not sure how anyone at Dell thinks having computers being forced reboot in the middle of a workday is acceptable in any enterprise environment. Was the option of never auto rebooting overlooked or was it deliberately removed?
If the latter, then we will need to kill any automatic updates taking place and force users to manually check for updates when convenient for them. If the former, please advise when the option will be added back so we can try and prevent machines from updating to 4.0.
We tried reaching you on a private message asking for the Service Tag but did not receive a response. Please feel free to reply to the private message whenever you are available.
"I'm not sure how anyone at Dell thinks having computers being forced reboot in the middle of a workday is acceptable in any enterprise environment. Was the option of never auto rebooting overlooked or was it deliberately removed?"
I have the exact same question. Removing the ability to suppress automatic reboots complicates matters for the Enterprise environment. I want to force devices to update, but forcing reboots will only increase help desk calls and cause dismay with our user base.
Bump. This is still a problem. Some application packages with DCU 4.1.0 are rebooting the system. This is obviously a problem when we don't want it to.
We are seeing the same issues but with specific models only and sometimes depending on what application needs it (E.g. BIOS generally triggers it on Latitude 7410, OptiPlex 7050, OptiPlex 7060, OptiPlex 9030 AIO & Precision 7740)
During the install command, we tried using the /reboot=disable, gets ignored...
On top of that, we run scans in the SYSTEM context so there is ZERO warning to the user (regardless of reboot time.)
This is unacceptable for an ENTERPRISE grade solution DELL.
You need to fix this ASAP!! This has been tested in 4.1
Posting the DELL response for everyone with the same problem that they sent me in a private chat:
Hi,
As we checked with our internal team the option been removed in an effort to ensure required reboots are performed, driver installations are completed and reliant hardware regains functionality, the "never" reboot option has been removed from DCU 4.0 and above.
Note: DCU 4.0 will not reboot the system automatically, it will display a pop-up reminder to reboot.
We had the case reviewed by our internal team and have an update.
The option to disable Automatic restart is removed on the latest version of Dell Command Update to ensure there is a reboot operation done when an update is installed.
However, the application will not restart the system but it will give you a prompt that the system needs a restart for updates to configure.
Also, the auto restart options are enabled on urgent updates like BIOS and audio video drivers as these drivers require a restart to configure.
Optional updates will not prompt a restart as it is not required on optional updates.
As per our check, the application is working as designed.
Be rest assured, this will not hamper the functionality of the system.
"However, the application will not restart the system but it will give you a prompt that the system needs a restart for updates to configure.
Also, the auto restart options are enabled on urgent updates like BIOS and audio video drivers as these drivers require a restart to configure."
Forgive me for not understanding this right, but it seems these two statements are conflicting and I want to be perfectly clear on what it means. Are you saying that even after selecting the option to 'Download and install updates (Notify after complete)' and critical updates are installed, that an automatic restart will NOT happen, but only notify the user that a restart is required? If so, what is the purpose of removing the disabling of automatic restarts?
Most of my clients are in back to back meetings all day and a 1-hour window for an automatic restart is almost sure to conflict with those meetings. Wouldn't it be more beneficial to have the option to set a time for a reboot?
To be clear, to EVERYONE, if you are using the command line to initiate driver updates (like we so with SCCM) then there is ZERO notification to the user!!! A few mins after the URGENT driver installs it will simply REBOOTS the machine, wham bam thank you sir/ma'am. DELL assertion that the user get notified is soo wrong it's in another zip code!! So as you say Jay Dubyuh, if the user is in a meeting, then too bad....
I have gone back/forth in private messages with DELL and they don't seem to understand, they just keep repeating what it *should* do and the it's by design...
Either live with it or don't use it, they don't understand or care about large Enterprise users...
DELL-Cares
Moderator
•
27855 Posts
•
781 Points
5229
0
Posted December 2nd, 2020 08:00
We tried reaching you on a private message asking for the Service Tag but did not receive a response. Please feel free to reply to the private message whenever you are available.
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice