revlondsouza

updated

2 years ago

R

revlondsouza

1 Rookie

•

3 Posts

0

16071

March 15th, 2018 08:00

Is Hardware Upgrade within the existing VxRAIL Possible?

Would like to get answers to 2 specific questions on existing VxRAIL Nodes :

  1. Can the internal Hardware components like Memory and CPUs  be upgraded/changed within the VxRAIL Nodes? ( I do know that we can add additional drives of the same type/capacity to the existing VxRAIL Nodes)
  2. Can the existing Vmware Vshpere licenses be upgraded from Vsphere standard to Vsphere Enterprise license? If yes, what would be the process and cost implications?
  • giadarola

    60 Posts

    12528

    1

    Posted August 2nd, 2018 08:00

    We do not support upgrading single CPU systems to dual CPU systems on VxRail.

  • giadarola

    60 Posts

    12495

    1

    Posted March 15th, 2018 08:00

    Depending on the HW platform, there are HW upgrades available. For instance, on the PE 13G and 14G you can add memory, GPU cards, etc. I'm not aware that we support upgrading the CPU though. Would need to defer that question to Product management.

    As for the license, yes you can upgrade from standard to enterprise. Customer would need to purchase said license. You can refer to the Licensing and ordering guide for more information.

    HTH.  Gary

  • revlondsouza

    1 Rookie

    •

    3 Posts

    12527

    0

    Posted March 15th, 2018 09:00

    Thank You Gary, The system is a E460F currently configured with 256GB and needs to be upgraded to 512GB per node.

    Will I be able to upgrade this through the DellEMC Quoting tool ( MyQuotes) or does it have to be done by a specific team?

    Regards,

    Revlon Dsouza

  • giadarola

    60 Posts

    12527

    0

    Posted March 16th, 2018 07:00

    Revlon,

    As far as I'm aware, yes you would order the memory upgrade thru MyQuotes. But since I do not have access to it, I cannot say for certain.  They don't let us Tech-Geeks near those systems...

    -G

  • Bill_Leslie

    56 Posts

    12528

    0

    Posted March 16th, 2018 08:00

    revlondsouza  Please work through your Dell EMC sales rep or reseller rep to quote this in MyQuotes.

  • scpd

    3 Posts

    12528

    0

    Posted August 1st, 2018 14:00

    We are fighting with DellEMC to add CPU to our single CPU Appliance!!!

    The is no mention in all official technical paper that upgrade CPU is not supported!!!

  • scpd

    3 Posts

    12528

    0

    Posted August 2nd, 2018 18:00

    I know, but why !!!!!!!

    even if we upgrade all the nodes? and rebuild the whole thing from the zero?

  • nhanlvl

    2 Posts

    12528

    0

    Posted August 27th, 2018 02:00

    the customer in vietnam has the same question! have a docummentation discuss about this problem? Would you help me answer this question?

  • ryan_leslie

    1 Message

    2657

    0

    Posted November 27th, 2018 11:00

    I have the same question, can CPUs be swapped to a higher model CPU? Anyone have answers?

  • 2657

    0

    Posted November 28th, 2018 06:00

    There is slide in one of the tech decks that shows this.

    Here are the parts that a customer can replace:

    Memory

    Hard drive

    SSD Cache and capacity

    PCIe network interface cards

    GPUs

    Micro SDHC card

    Power supply

    Parts that are Field replaceable unit (FRU)  I'm assuming only if there is defect, so customer can't swap out CPUs or add a CPU if they are running a single.

    NVMe cache drive

    processors

    motherboard

    HBA330

    BOSS controller card and M.2 Sata disk

    Network daughter card (NDC)