UNSOLVED

Mellman1

updated

15 years ago

M

Mellman1

13 Posts

1

12501

January 6th, 2012 15:00

VNX5300 - Changing IP of SP and CS

Does anyone have the cli instructions to change the IP addresses of the SP's and the CS?

  • christopher_ime

    6 Operator

    •

    1962 Posts

    1361

    0

    Posted January 6th, 2012 23:00

    Mellman,

    It depends on the version of VNX OE that is running.

    1) Older than 7.0.35.3/05.31.000.5.502, this requires engaging your service provider as you will not have visibility to an important step to manually fuse the file with the block components.  This is noted in the following KB article:

    emc269625: "Changing Control Station and SP IP addresses on 7.0.12.0 - 7.0.14.0 VNX Unified systems only"

    2) If on the other hand you are running 7.0.35.3/05.31.000.5.502 or newer, you can use the steps as noted in the following KB article:

    emc279637: "Changing Control Station and SP IP addresses on 7.0.35.3 VNX Unified systems"

  • stijnvl1

    4 Posts

    1361

    0

    Posted January 30th, 2012 08:00

    I am trying to follow the emc279637 KB article, and I run into trouble during the very first step: I cannot get the serial console connection operational.

    I use the settings mentioned in the article: Speed 19200, Data bits 8, Stop bits 1, Parity None, and Flow Control None

    The null-modem cable I am using is OK: it works fine for serial connections to other devices.

    I've tried using Hyperterminal and putty, both result in the same.

    All I get when I use these settings is some random character each time I enter a key. Things like "ü½ã" and such.

    What am I doing wrong?

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    1361

    0

    Posted January 30th, 2012 10:00

    Maybe you are using the wrong port?

    The CS serial port is on the front

    We used to ship a working serial cable with the system

  • stijnvl1

    4 Posts

    1361

    0

    Posted January 31st, 2012 01:00

    Thanks Rainer!

    Using the serial cable shipped with the VNX5300 was the solution to my problem. Although it keeps me wondering why my other null model cable isn't working with the VNX5300?

    The serial port is on the rear of the CS (tool icon next to it). On the front, there's only a DVD player and a USB port.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    1361

    0

    Posted January 31st, 2012 02:00

    Yes, serial port location depends on the CS model

  • stijnvl1

    4 Posts

    1361

    0

    Posted January 31st, 2012 03:00

    I have 1 question left: both CSs and SPs now have a new IP address, but they are still using the old domain name and the old DNS server IP. How can I change DNS and domain name settings on the CSs and SPs?