I noticed you need to configure iSCSI in the Data Mover. Unfortunately, VNX-File only supports to configure iSCSI via command line, you aren't able to configure iSCSI in the Unisphere. The steps are as below:
1. create an iSCSI target in the VNX-File.
2. create an iSCSI LUN in the VNX-File.
3. create an iSCSI LUN mask in the VNX-File.
4. install mircrosoft iSCSI initiator in windows client.
5. configure iSCSI initiator in windows client.
I recommend you read a video about how to configure iscsi on VNX unifed, this video is a chinese demonstration(Link: https://community.emc.com/videos/3828), but you can watch the specific configuration steps. If you feel my answer is helpful, please mark it as correct answer or helpful answer. thanks.
I'm glad to see you in this thread. May I ask you a question about iscsi configuration on the VNX-File. As I konw, the iscsi function can only be configured via command line on the VNX-File. Have I got that right? Thanks.
KEHutchinson
4 Apprentice
•
633 Posts
1475
0
Posted August 28th, 2013 06:00
This thread is being moved to the VNX Support Forum.