UNSOLVED

Letbetterp

updated

14 years ago

L

Letbetterp

2 Intern

•

196 Posts

0

2359

December 3rd, 2012 15:00

5700 10 Gb FC Slick's for DataMover Part Number

Does someone have the part number for FC 10 Gb X-Blade Slick.

10GbE for NAS connectivity

2 Port 10GbE SFP+ Optical per IO Module

I think the part number is 303-081-103B for the two port 10 GB FC slick. (Can someone verify that?) Thanks

  • devijb

    15 Posts

    995

    0

    Posted December 4th, 2012 06:00

    Hello,

    Yes: "303-081-103B" is the PartNumber for the Dual Port 10GbE SFP+ Optical IOModule for the XBlade of VNX;

    Notice: a new "303-081-103C" is also available and supported with VNXoeFile 7.1

    Regards, Benoît

  • Letbetterp

    2 Intern

    •

    196 Posts

    583

    0

    Posted December 4th, 2012 13:00

    I got block and file terminology wrong, I guess slicks refers to block and io modules for DM.

    Thanks for your help!

  • Letbetterp

    2 Intern

    •

    196 Posts

    995

    0

    Posted December 4th, 2012 13:00

    Here is what we needed.Thanks---- VDMMXG2OPBU / VNX 2-PORT 10GBE OPT DM MODULE-UPG  Also should have said module not slick

  • devijb

    15 Posts

    995

    0

    Posted December 5th, 2012 05:00

    ah ok:

    This is the "order reference";

    This one (VDMMXG2OPBU) is the "new" card P/N 303-081-103C, you need to run VNXFileOE 7.1 for this one;

    If you need the "old" one, please ask for the "VDMMXG2OPU" = 303-081-103B;

    Regards, Benoît

  • Letbetterp

    2 Intern

    •

    196 Posts

    995

    0

    Posted December 5th, 2012 07:00

    If you had two cards on each side of DM can you lacp or ether channel active side together for 40Gb

    We are at 7.1.47.5

  • Letbetterp

    2 Intern

    •

    196 Posts

    995

    0

    Posted December 5th, 2012 08:00

    I pulled 4x8Gb FC and use powerpath that can have up-to 32 path's to device.

    We are getting a couple of ucs enclosures with blades and they were saying that it has a total of 80Gb backend.

    We are going into 2 CISCO 7K's or the 5K's not sure yet, but we want to just go into the 7k's Does anyone have a similar setup, we were told to use FC and Ethernet instead of fcoe. What are other people doing.

  • devijb

    15 Posts

    995

    0

    Posted December 5th, 2012 08:00

    Yes you can;

    But please keep in mind that each DataMover is connected to the SP through 2x8Gb FC links...

    So I don't think you will be able to go over 16Gb/s ! (for each Datamover)

    Regards, Benoit

  • Letbetterp

    2 Intern

    •

    196 Posts

    995

    0

    Posted December 5th, 2012 09:00

    devijb wrote:

    Yes you can;

    But please keep in mind that each DataMover is connected to the SP through 2x8Gb FC links...

    So I don't think you will be able to go over 16Gb/s ! (for each Datamover)

    Regards, Benoit

    yes I know lacp refers to network, but we had evolved conversation into another area block. we have SP through 4x8Gb Fc and four 1Gb module's.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    995

    0

    Posted December 5th, 2012 09:00

    i think we need to understand what you are looking for, LACP refers to network connectivity, not fiber channel.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    511

    1

    Posted December 5th, 2012 12:00

    PL_LISD wrote:

    We are going into 2 CISCO 7K's or the 5K's not sure yet, but we want to just go into the 7k's Does anyone have a similar setup, we were told to use FC and Ethernet instead of fcoe. What are other people doing.

    We have Cisco UCS as well, since we have Cisco MDS directors we bought fiber channel license/gbic for UCS FI's and connected those ports to MDS. Ethernet ports from FIs are going to Nexus 5ks.