Dell Venue 11 Pro (7140) wont charge via External Battery
Anyone know why? The external battery charges my phone so it does work. (is brand new 20000 mAh! I have tried the cable that came with the external battery and the power cable with my Venue. Both times I get "Plugged In, Not Charging"
I have also tried using both output ports from the external battery. 2.1A and 1.5A.
The kicker is I contacted Dell to find out what External Battery to purchase and NO ONE could understand what I was asking. All they wanted to do is ship me another battery under warranty for my Venue. SMH
Make sure to use the correct microusb cable that has data pins shorted. My venue 11 pro 7140 charge correctly. It's just a little slow compare to the original wall charger which is 23W.
i used the cable that came with the external battery and didn't work so then tried the power cable that came with the Venue and same thing.
I spoke with Dell and they said they are not compatible, but yet they sell one PNG 5200 mAh so I purchased it and just received it. I have not tried yet and do not see how it is going to work. It has the same V as the Limefuel I purchased, the only difference is mine is 20000 mAh, so has a longer charging capacity.
We will see. I also ordered the Mobile Keyboard which has a battery backup. I need something by this Monday for my new job and if my Tablet fails so do I!
Dell shorted the data pins in their wall charger. That's why you can use any microusb cables with the wall charger. The two cables you tried are basically the same. A quick test is to plug your android smartphone to a computer with the cable, if you can read data from your phone, then the cable won't charge the tablet for you. Here is a link of shorted microusb cable.
That's interesting. The tablet must in data trans mode, which is only 5v 0.5amp, which only gives you 3W charging speed. The core M TDP is 4.5 W. Thus you end up losing power. Still, I think the cable is worth trying. 5 dollar plus 1 day free shipping from amazon prime. At least it works for me. I can charge the tablet from 10% to full in 2.5 hours when turned off. 6+ hours when using, with my Anker external battery.
Second Test= Turned Venue Pro OFF Let it charge via PNY Battery which Venue Cable. Two hours, when I booted up here is the error message.
It did Charge 20% in 2 hours. BUT this is not what it was purchased for.
WHY WOULD TECH SUPPORT NOT TELL ME I NEED AN ADDITIONAL CORD FOR THIS MACHINE! OMG!!!
Any suggestions on who to contact at Dell to voice a complaint and throw this machine in their face? If it wasn't for you helping me Ted I would have written off Dell and went to Surface Pro 3, which I still might possible do after my exam next week.
There aren't any differences. 5v 1amp battery will give you 5W charging speed. 5V 2amp will give you 10W charging speed. If the charging speed is too slow, you will lose power while using it.
Good test result. As I said when the tablet is in data transmit mode, it gives you 5v 0.5amp, which is a little less than 3w. The the battery in your tablet is a 38wh battery, which means the external battery charges 10% per hour.
I agree with you that the surface pro 3 is a much better product. Save you a lot times, and troubles. I am still waiting for the new bios updates, which has been disappeared for 3 weeks. DELL has some serious problems in their product support management, which greatly impact their reputations and customer loyalty. If you want a easy life, go get a surface pro 3 or surface 3, and stay away DELL until they improved their way of doing things.
External battery packs will charge Venue 11 devices via uUSB but only at the greatly reduced trickle rate. It would take up to 24 hours to charge completely.
I believe that we'll be adding the 40-pin connector to the Targus car kit that we sell on dell.com again soon. With this, you could charge at a normal rate via the 40-pin connector on the bottom of the tablet. Don't order this until it says it comes with this connector again though as it was removed for a while (and I think still is not there).
Ted B. L.
11 Posts
4007
1
Posted June 4th, 2015 08:00
Make sure to use the correct microusb cable that has data pins shorted. My venue 11 pro 7140 charge correctly. It's just a little slow compare to the original wall charger which is 23W.