UNSOLVED

Trevisolli

updated

8 years ago

0

17773

June 26th, 2018 09:00

Updating Bios, Idrac, LifeCycle in Dell R710

Hello Everyone!

I think this kind of topic is very common in this forum, but I tried to search and I didn't find anything, so I decided to make this topic.

 

I work in a company that owns a R710 Server, but this server has all of his firmware downgraded, life Lifecycle, bios, idrac and other stuff.

I tried to execute the instalation in Lifecycle using dell FTP but a message like "this version of lifecycle doesn't support updates using ftp", I'm trying to update using Idrac but this message keep showing up: "File is not valid for iDRAC Firmware update"

You can see the configurations bellow:

O.S: Vmware 6.0

Idrac6(is it possible to upgrade to Idrac 9? Or I can upgrade just to new releases of Idrac6?)

Bios: 6.4

Lifecycle 1.6.0.73

Firmware version: 1.95

Someone can help me with the direct link to upgrade system bios and firmares using Idrac?

Thank You!

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    17173

    0

    Posted June 26th, 2018 11:00

    Hi,

    It is not possible to upgrade to an iDRAC 9 it is only in 14th generation servers. 11G servers do not work with the FTP site anymore. http://www.dell.com/support/article/us/en/19/sln310452/lifecycle-controller-lc-firmware-update-error-no-update-is-available-on-any-11g-server?lang=en

    We would recommend using the repository manager to create custom update images http://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=9rx9m

  • cobe18

    3 Posts

    11999

    0

    Posted February 12th, 2020 00:00

    How about if the Repository Manager no longer has R710 available? As is now the case. Thanks

  • Netwerx

    13 Posts

    11969

    0

    Posted February 12th, 2020 09:00

    I don't think there is a way to do it online through the old IDRAC.  It's not a matter of buying a license but of your IDRAC being too old to communicate via FTP. You can upgrade the IDRAC firmware with the IDRAC and Lifetime Controller firmware update for maintenance reasons but it won't get you FTP access which requires a newer IDRAC rather than just newer firmware rev.  I'd go directly to the box and upgrade there.  ESXi may complicate things depending on which VM is on top of it.  I'd build a platform specific bootable ISO, make a bootable USB from it and add your desired upgrades which you downloaded seperately from Dell's website and upgrade firmware offline.

    *Remember that you should update drivers before firmware to avoid problems*.

    Ramblings:  You can also remote into the server OS in many cases to do updates  I just did that on an old R710 server with Server 2016 Datacenter.  I'm not knowledgable about Level 1 ESXi hypervisor which I'm guessing you are running based on the IDRAC's reporting your OS as VMware but an offline update from boot disk should bypass that.  I've not run into problems on servers but on some PCs, flashing the BIOS required Intel chipset updates not present in Windows7 off the disk leading to incomplete BIOS updates and I had to force a reflash to complete the components such as ME.  Also, you may have to upgrade the BIOS in two stages with that model.  Maybe just me but before upgrading components such as RAID firmware from within the OS, I'd quesce databases.

  • adminandy

    6 Posts

    11829

    0

    Posted February 18th, 2020 02:00

    I'm having the same issue as OP... I'm trying to update R910s and R710s but FTP does not work, and no matter what I put on a FAT32 Formatted USB (EXE32, EXE64, .SIGN, .BIN EXE(HTTP) etc.) Unified Configuration Manager complains there is no catalog on the USB.

    I've tried all 4 USB ports on the thing but I also don't know which one is USB0?

    This is so difficult. Dell Repository Manager just hangs on install for me too!

    Is there a simple guide to update these old servers using USB that takes you through it from start to finish?

     

  • VollToll

    1 Rookie

    •

    5 Posts

    10808

    0

    Posted April 17th, 2020 15:00

    just did it for R710. make sure in DRM you select old catalog: 

    I used 19.06.01 (go from Index to find old Update Catalog for Enterprise Servers. 

    still pain tho. too bad the ISO https://dell.app.box.com/v/bootablet710

    are not available anymore for 11g series. 

    Exported as smart bootable ISO in DRM. 

    For USB I used 2.0 and pick the rufus setting form Dell page: 

    https://www.dell.com/support/article/en-ca/sln296810/how-to-create-a-bootable-usb-device-with-rufus-to-update-dell-servers?lang=en

  • Boompy

    1 Message

    10341

    0

    Posted May 7th, 2020 04:00

    How did you manage to select an OLDER catalog? Obviously the latest version does not support the R710.

    I've tried everything but cannot find a link to anything other than the latest version.

    I understand how to load / add alternate catalogs, but have no idea where to find them.

    Thanks!