Can I safely delete the contents of
C:\ProgramData\Dell\SARemediation\SystemRepair\Snapshots\? It's taking up 22GB.
I need to free up some space in drive C and done all things, except this if it is Can I safely delete the contents of C:\ProgramData\Dell\SARemediation\SystemRepair\Snapshots\? It's taking up 22GB.
ERrrrrrrr I caution a careful response to your question, and don't want a YES/NO as an answer.
LLM answer is.....
Probably not manually. That folder is part of Dell SupportAssist/System Repair, and sources caution that deleting the SARemediation/SystemRepair files directly can break the repair feature; Dell’s own guidance is to turn off System Repair/backup in SupportAssist if you want the space reclaimed, which can then remove the stored files.
Open Dell SupportAssist.
Look for System Repair or backup-related settings.
Disable that feature there rather than deleting the folder by hand. Dell guidance indicates this is the intended way to remove those backup files.
If you need the space now
If the folder is huge and you’re sure you don’t want Dell’s repair backups, disabling System Repair in SupportAssist is the safer route than deleting the contents of C:\ProgramData\Dell\SARemediation\SystemRepair\Snapshots\ manually. After disabling it, the backups may be removed automatically, though it may take a while.
The program creating files in your hidden and protected C:\ProgramData\Dell\SARemediation\SystemRepair\Snapshots folder is Dell SupportAssist OS Recovery. This program is listed as Dell SupportAssist Remediation at Control Panel | Programs | Programs and Features.
If running correctly, Dell SupportAssist OS Recovery creates a new Dell system repair point (a.k.a. snapshot) in C:\ProgramData\Dell\SARemediation\SystemRepair\Snapshots about 30 min after every system restart and purges the oldest system repair point once the maximum allotted disk space of ~ 15 to 20 GB as been reached. These system repair points can be use by Dell SupportAssist OS Recovery for an emergency recovery if your system ever fails to boot up into Windows.
As anne_droid's AI model suggested, if you open your SupportAssist settings and temporarily turn OFF the switch labelled "System Repair is Enabled" as instructed <here> in the SupportAssist v5.x User Guide this should purge all the old Dell system repair points (snapshots) in your C:\ProgramData\Dell\SARemediation\SystemRepair\Snapshots folder. However, once that switch is turned back ON and new system repair points start accumulating again that folder will eventually grow back to its maximum allotted disk space of ~ 15 to 20 GB.
If you require further assistance please let us know your Dell computer model and the version and OS build number of your Windows operating system [open a Run dialog box (Windows key + R) and enter winver].
@anne_droid Thank you for the detailed response! I followed your suggestion and checked SupportAssist settings. After learning what the folder is for, I've decided to leave System Repair enabled and keep the snapshots as a safety net in case Windows ever fails to boot. Really appreciate the guidance!
@lmacri Thank you for the very thorough explanation! Now I fully understand what those snapshot files are for and how they work. I've decided to leave System Repair enabled rather than disabling it, since having an emergency recovery option feels more important than reclaiming the space — especially since my C drive is already in a much better state after other cleanup steps. Really appreciate you taking the time to explain this in detail!
I don't want to confuse matters, but you might want to read my 27-May-2026 post in MastiffX's SupportAssist OS Recovery vs. SupportAssist Update Plugin. There is information in that post about the Windows Recovery Environment (WinRE) built in to your Windows operating system, and why I replaced Dell SupportAssist OS Recovery with Macrium Reflect Free v8.0 disk imaging software*** after my Inspiron 15 5584 would not boot up and Dell SupportAssist OS Recovery failed to repair the problem.
As an extra precaution I've enabled Windows System Restore (disabled by default in Win 10 and Win 11) as instructed in the Windows Central article How to Use System Restore on Windows 11 and Windows 10 so I always have a recent Windows restore point I can use to roll back my Windows OS. Windows restore points are stored in a hidden, protected folder at C:\System Volume Information, and by default my Win 10 OS automatically allocates 10% (~22 GB) of my 234 GB C:\ drive for Windows restore points.
*** NOTE: Unfortunately, the psmounterex.sys driver (Paramount Software Image Mounting Driver) bundled with all Macrium Reflect v8.x disk imaging software was added to Microsoft's vulnerable driver blocklist in April 2026. Paramount no longer offers free editions of Macrium Reflect, so as of April 2026 I can no longer mount the Macrium Reflect Free disk images saved on my external backup drive to browse individual files and folders in File Explorer. I can still create and restore disk images with Macrium Reflect Free v8.0 if I ever need to perform another emergency recovery, but I've started looking into other disk imaging software (e.g., like TeraByte's Image for Windows - not free, currently $49.98 USD per device for a "perpetual" lifetime license) to replace Macrium Reflect Free v8.0. ----------- Dell Inspiron 15 5584 * 64-bit Win 10 Pro v22H2 build 19045.7291 * Firefox v151.0.4 * Microsoft Defender v4.18.26050.15-1.1.26050.11 * Malwarebytes Premium v5.5.7.255-157.0.5633 * Macrium Reflect Free v8.0.7783 * My Dell v2.2.6.0
I just realized that SystemRepair is takin gup over 50% of my storage, and I am down to the last 10% free. I tried your instructions but Settings in SupportAssist does not show anything about SystemRepair. I am on a laptop about 11 years old with version 22H2 OS Build 19045.6466. What else can I try?
I tried your instructions but Settings in SupportAssist does not show anything about SystemRepair.
Hi EricLaser:
What versions of Dell SupportAssist and Dell SupportAssist Remediation (also called Dell SupportAssist OS Recovery or System Repair) are listed at Control Panel | Programs | Programs and Features? Here's an old image I captured in February 2023 just before I uninstalled all SupportAssist-related software from my Inspiron 5584:
NOTE: See my 08-Feb-2025 post in ygil’s BSOD Issues After Windows Updates for further details on how I replaced the functionality of my SupportAssist-related software with other programs.
If Dell SupportAssist Remediation v5.5.x (a.k.a. Dell SupportAssist OS Recovery) IS NOT installed the System Repair settings will not appear in SupportAssist. The section titled "Configure system repair settings" in the SupportAssist for Home PCs User Guide notes that you must have Dell SupportAssist OS Recovery v5.1 or higher installed in order to see the check box labeled "System Repair is enabled" at Settings | System Repair.
If Dell SupportAssist Remediation v5.5.x (a.k.a. Dell SupportAssist OS Recovery) IS currently installed you should also be able to turn off System Repair in the SupportAssist OS Recovery settings manager at Control Panel | System and Security | SupportAssist OS Recovery. See the older images in my 14-Dec-2024 post in MichaelInParis' Any way to reduce the size of the DTPDB.DB file?.
If you cannot find any trace of Dell SupportAssist Remediation v5.5.x (a.k.a. Dell SupportAssist OS Recovery) on your system then see if you can manually delete your old Dell system repair points (snapshots) from the hidden C:\ProgramData\Dell\SARemediation\SystemRepair\SnapShots folder. If you can't (i.e., if that folder is still protected and you do not have sufficient user privileges to view the folder contents) then you will likely have to uninstall ALL of your SupportAssist-related software first, including Dell SupportAssist and Dell SupportAssist OS Recovery Plugin for Dell Update, before you can manually delete the contents of that folder - see employee DELL-Chris M's SA Uninstall/Reinstall for instructions for manually deleting older Dell system repair points.
I am on a laptop about 11 years old with version 22H2 OS Build 19045.6466.
ASIDE:
If your Win 10 v22H2 OS build is 19045.6456 that means your OS has not been updated since the KB5066791 monthly cumulative Quality update was released on 14-Oct-2025. Note that you can still enroll in the Windows 10 Extended Security Updates (ESU) program and continue receiving security updates for your OS any time before the ESU program ends on 12-Oct-2027 if you wish to do so. Enrollment should be free if you log into Windows at boot-up with your Microsoft Account and opt to back up your PC settings if you are asked how you want to enroll - see Step # 7 of the 16-Jul-2025 Neowin article How to get one more year of Windows 10 updates for free. Post back if you have any questions about enrollment. ----------- Dell Inspiron 15 5584 * 64-bit Win 10 Pro v22H2 build 19045.7417 * Firefox v152.0.5 * Microsoft Defender v4.18.26060.3008-1.1.26060.3008 * Malwarebytes Premium v5.6.2.268-160.0.5677 * Macrium Reflect Free v8.0.7783 * My Dell v2.2.6.0
That's good news. Glad to hear you were able to delete your old Dell system repair points (snapshots) from the hidden C:\ProgramData\Dell\SARemediation\SystemRepair\SnapShots folder and free up some disk space.
It would be helpful for other users following this topic if you could post back and let us know which of my suggestions <above> solved the problem for you.
I went to Windows Update and it asked if I wanted to enroll in the extended updates, so I did. After that I was able to go into Control Panel, select SupportAssist OS Recovery and turn it off, gaining 100 GB of storage.
anne_droid
6 Operator
•
2633 Posts
•
9687 Points
0
0
Posted June 10th, 2026 09:39
Hi
ERrrrrrrr I caution a careful response to your question, and don't want a YES/NO as an answer.
LLM answer is.....
Probably not manually. That folder is part of Dell SupportAssist/System Repair, and sources caution that deleting the SARemediation/SystemRepair files directly can break the repair feature; Dell’s own guidance is to turn off System Repair/backup in SupportAssist if you want the space reclaimed, which can then remove the stored files.
Open Dell SupportAssist.
Look for System Repair or backup-related settings.
Disable that feature there rather than deleting the folder by hand. Dell guidance indicates this is the intended way to remove those backup files.
If you need the space now
If the folder is huge and you’re sure you don’t want Dell’s repair backups, disabling System Repair in SupportAssist is the safer route than deleting the contents of
C:\ProgramData\Dell\SARemediation\SystemRepair\Snapshots\manually. After disabling it, the backups may be removed automatically, though it may take a while.Kind Regards
anne_droid