I replaced my Inspiron 40 gb drive with a seagate momentus 100 gb 5400rpm unit (wanted the 7200 rpm unit, but it wasn't available yet -- may not be now). Very quiet (I haven't heard anything out of it).
I just received a replacement for WD Scorpio 60GB drive for my I700m due to the "clicking" sound.
It seems to me that a lot of people on this forum having problems with this particular drive.
The replacement drive I received today id Fujutsu (it says "refurbished" on the package, but I think it was just opened for inspection, the drive was made 02-05).
On another note, can anyone explain how the hard drive modules work (the ones that go in the floppy/battery bay)? Two hard drives would be running at once? I'm not sure how data transfer would work.
Jerry,
I'm also planning on installing the 100 gb Momentus in my i8600. I haven't installed a notebook hardrive before. What are the exact steps you took to install this drive? Thanks.
Message Edited by wireless49 on 03-15-2005 07:44 PM
@wireless49 wrote:
Jerry,
I'm also planning on installing the 100 gb Momentus in my i8600. I haven't installed a notebook hardrive before. What are the exact steps you took to install this drive? Thanks.
Using the Advanced Forum Search on the bottom of this page, you can quite easily find the answer to this often asked question.
Click on Product Support above, then User Guides. It shows you how to remove the drive, then you remove the pin adapter from the end of the drive, then you install the new drive, add the pin adapter, put it back in, and then install the OS, chipset drivers, and other drivers.
@JC74 wrote:
On another note, can anyone explain how the hard drive modules work (the ones that go in the floppy/battery bay)? Two hard drives would be running at once? I'm not sure how data transfer would work.
Yes, two hard drives would be running at once. One would be C, one would be another letter. You would choose where to store things.
Thanks for that info. I understand the physical part of removing the old drive and installing the new drive.
What I'm really looking for is can I clone my current 40 GB drive to the new 100 GB drive, using the Apricorn EZ gig II upgrade kit? I'm also concerned that the Apricorn cloning software will only format the new drive to 40 GB, just like the source drive. I'm looking for anyone with experience using the Apricorn disk cloning software (available from Dell), especially when going from a smaller to a larger hard drive.
Thanks in advance for any help.
I should add, the new 100 GB drive from Seagate does not come with any installation software.
Message Edited by wireless49 on 03-15-2005 10:14 PM
I swapped out my existing HD and replaced it with a 100gb Seagate Momentus 5400 rpm HD. I did it using the Apricorn software and hardware. It is simple and fast. Just follow the instructions, which come in the black and white ez upgrade User Guide.
If you have not purchased your Apricorn app, go to newegg. They have the best deal. It comes with an enclosure and the software.
Jerry Park
695 Posts
547
0
Posted March 15th, 2005 19:00