UNSOLVED

AJ500

updated

21 years ago

A

AJ500

13 Posts

0

6598

March 11th, 2006 02:00

Unable to share folders on RAID0 drives

Anyone successfully sharing folders on an XPS RAID0 drives? I've tried to share folders with another PC, both running Windows XP Pro SP2, on a home network.  The error message I get at the connecting PC is:
 
"\\xxxxxx is not accessible. You might not have permission to use this network resource. Contact the adminsitrator of this server to find out if you have access. Not enough server storage is available to process this command."
 
It's not a permission problem because shared folders on the single drive have the same share permissions and there's no problem accessing them.
 
If you are having similar problems, is your system using NVIDIA RAID controllers?


 
  • davejohn

    2 Intern

    •

    2484 Posts

    424

    0

    Posted March 11th, 2006 09:00

    That sounds more like a firewall problem. Disable the firewall and try it. If it works you need to check the firewall settings.

    Dave
  • AJ500

    13 Posts

    424

    0

    Posted March 11th, 2006 13:00

    Thanks, but I don't think it's a firewall problem because:
    1) Turning off the firewall does not fix the problem.
    2) The firewall is turned on on two other WinXP Pro SP2 machines on the network and there's no problem sharing any drive from those machines.

    The nVidia forums also report similar problems with nVidia motherboards.  I think it's related to the nVidia RAID controller.
  • arlmed

    11 Posts

    424

    0

    Posted March 12th, 2006 02:00

    Funny (in a sad way though) I have the exact problem, but my RAID controller is an Intel 82801 GR/GH SATA controller. I discussed the problem with the tech along with the failure of one of the hard drive on the RAID 0 and he did not answer my question, he just steered toward my hard drive problem. Is Dell having a system wide problem with these XPS? First the hd failing, the card reader keeps doing a disappearing act, then can't share files with other XP Pro SP2 computer. Heck, what's next?
  • AJ500

    13 Posts

    424

    0

    Posted March 12th, 2006 05:00

    Google is my friend!!!!!  I found the solution (at least for my situation).  Apparently, the NVIDIA Raid controller needs more than the default stacksize allotted to lanman.  In my case there was no entry in the registry for IrpStackSize so it used the default and failed.

    You can increase the IrpStackSize value. You must first add this value to the following key if it is not already present:

    HKEY_LOCAL_MACHINE SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters

    Value Name: IrpStackSize
    Data Type: DWORD
    Value: decimal 20 works for me.
     
    EDIT: Removed note that IrpStackSize is case sensitive.

    Message Edited by AJ500 on 03-13-2006 02:41 PM