UNSOLVED

djlrmiller

updated

20 years ago

0

4419

July 25th, 2006 14:00

Series of Numbers to Use When Reformatting Hard Drive?

Greetings,

A few years ago, I had to reformat the hard drive and re-load Windows with the assistance of a Dell technician. When we reformatted the hard drive he had me enter 2 or 3 long strings of numbers. Does anyone know what those nubers were or what they are for? I checked the instructions for reloading the OS (journal: 06206GSL2X) and there is no mention of this string.

(BTW, I'm not referring to the Windows product code entered after reformatting and during the Windows install.)

Also, the instructions only list FAT-32, is NTFS an option for Win98se?

Thanks for any help.

Regards,
Douglas Miller
XPS R350
Windows 98se
350 mhz PII
  • keithg2

    2 Intern

    •

    935 Posts

    261

    0

    Posted July 25th, 2006 15:00

    Sorry, I read your post wrong. You clearly said you weren't talking about the Windows Product Code.

    I have no idea what the tech had you enter at a DOS prompt, sorry. Hopefully, someone else will be able to help you.

     

  • keithg2

    2 Intern

    •

    935 Posts

    261

    0

    Posted July 25th, 2006 15:00

    Win98SE cannot create/read/write an NTFS file system. Only 32bit operating systems like Windows 2000, XP and above can. Win98SE is a 16bit OS and can only read/write FAT and FAT32 file systems. There are NTFS read/write utilities such as NTFSDOS at www.sysinternals.com that allow Win98SE to access/read/write NTFS file systems.

    It sounds like the "string of numbers" are what you stated, the Windows Product Code. Hopefully you wrote down those strings when you had to enter them or you have a Windows Authentication Certificate that gives you those strings. You'll always need these when you reinstall the OS. If not, contact Dell for the Windows Product Code of your Win98SE OS.

    Hope this helps!
  • 261

    0

    Posted July 25th, 2006 15:00

    Thanks for the clarification on NTFS. As for the strings (plural) of numbers it was not the Windows product code. As I recall it was entered at the DOS command prompt at reformat time and looked something like this (obviously I'm just making up the numbers...):

    32 123 12 17 241 317 21
    17 561 21 545 ....

    (No it wasn't the Power Ball ;-)

    Regards,
    Douglas MIller

    Message Edited by djlrmiller on 07-25-200611:42 AM

    Message Edited by djlrmiller on 07-25-200611:43 AM