UNSOLVED

huyrich

updated

22 years ago

H

huyrich

28 Posts

0

10766

November 5th, 2004 01:00

SATA hard drive detected as IDE

I'm using a Dim8300. I have 2 SATA hard drives and 2 CD-DVD drives. When I installed Windows (on Primary SATA drive) with both hard drives on, there was no problem.
But once, I needed to turn off the secondary SATA hard drive. Then I turned it on again, and windows hardware detected it as a new device, but kept reporting it as a Secondary IDE device and failed to install driver for it.
Now I'm still using both drives fine, but it's annoying that everytime I restart Windows keeps displaying error message about that "Fail to install driver..." thing.
How could my SATA HD not be properly detected as SATA but IDE? Any solution for this?
  • huyrich

    28 Posts

    584

    0

    Posted November 8th, 2004 16:00

    Bump!!!
  • NVRambo

    1864 Posts

    584

    0

    Posted November 8th, 2004 18:00

    F2 into BIOS under "drive configuration" and turn off/disable "primary drive 0 or 1".

    Enable or set to "auto" the SATA primary and secondary drives up top.

    http://support.dell.com/support/edocs/systems/dim8300/sm/syssetup.htm#1104309

    ESC to exit and press enter to 'save changes'.

    Perhaps that will help.
  • huyrich

    28 Posts

    584

    0

    Posted November 9th, 2004 15:00

    Thanks for the reply.

    But it didn't work. Both IDE channel have been turned off, and both SATA on AUTO.

  • huyrich

    28 Posts

    584

    0

    Posted November 15th, 2004 06:00

    bump!!