
UNSOLVED
Reinstall XP with SATA, pre-emptive advice and general observations
Hi all,
I've bought two Dells in the last year, first a XPS gen 4 and now a Dimension 9150 for work, both with SATA HDs. I like to reinstall XP right off the bat, and partition the HD in the process, to get a clean install without the extraneous features that accompany a new Dell when it arrives.
I can't say I'm an expert, but I've had my fair share of trial and error hurdles with both computers. The best advice I can give you if you are considering buying a Dell with a SATA drive (or RAID for that matter) is
make sure you order a floppy drive with your system! Regardless of if you want to reinstall right away or may need to some time in the future, you will likely need a floppy to install the proper drivers during install so that windows will be able to see your SATA/RAID drives.
That said, there appears to be a few different ways to address the problem of Windows setup not being able to see SATA/RAID drives. The most quoted method is to create a floppy disk with the drivers on there, you use the "F6 method" during Windows setup to preload the drivers. Depending on your system, use your service tag to download the appropriate drivers from Dell Support, unzip and install those drivers and look for the readme.txt file for directions on how to complete this. In theroy those drivers should already be on your system when it arrives new, along with the readme file, but I didn't see it on my 9150 so had to update the drivers first.
The second method is easier, it involves changing the BIOS settings: directions are at the lower part of this page (works for Dimensions after the 8400 and XPS Gen 3):
http://www.djdenham.com/8400%20Special.htm
I have tried both methods on both of my computers, using the F6 one first. With both computers, I would be able to preload the drivers and start the Windows install, but would always get error messages indicating Windows had experienced an error and is shutting down to avoid system damage, along with messages to run chkdsk and also check for viruses and to unload any disk control drivers and try again. I coudn't get past this screen after several different attempted work-arounds. My first computer shipped with a floppy drive installed, the second did not. I used a USB floppy borrowed from a friend's (Dell certified) company for the second computer. I read later somewhere than you can not use a USB floppy to perform the F6 install.
The second method worked for me for both computers, but I have also read that using this method could possibly significantly reduce the performance/speed of the SATA drive. I haven't spent any time trying to confirm this. What I can tell you about my home machine is that when gaming, BF2 in particular, load times are excruciating long, even compared to friends who are running older/slower computers, even with IDE drives.
Take or leave what you feel you need to from the post, aplogies for a long post... I'm hoping to help some people from my experiences and hopefully give a heads up to others who have yet to buy. That all said again, anyone who may have any ideas on the problems I've had with the F6 install option, please let me know... I can live with the 9150 in it's current configuration, it doesn't need to be super efficient on the HD as it's a work machine that will see lots of vid/photo editing, some encoding and mostly email browsing and proposal generation. The XPS gen 4 though could use a shot in the arm where the HD is concerned. Then again the 9150 is dual core with more memory, I'm considereing swapping the nVidia 6800 to the 9150 for it's ATI X300 and taking the XPS to work!
Cheers, YZ
Responses (0)
Solutions (0)
