UNSOLVED

.SevSaint

updated

19 years ago

S

.SevSaint

12 Posts

0

14198

June 18th, 2007 21:00

Help with floppy drive

 
I am currently having trouble using my floppy drive. I can not format any disks and anything i try to install does not work.
 
I have not installed it, and didnt know i needed to.
It doesn't read or format anything so i followed a friends advice and went into f2 and seen in a list that it is not installed.
 
Someone tell me what i should install for that, im going to try installing a chipset to make sure i have it installed though i do think i had already done that..
  • .SevSaint

    12 Posts

    326

    0

    Posted June 18th, 2007 22:00

    OS Name Microsoft Windows XP Home Edition
    Version 5.1.2600  Build 2600
    OS Manufacturer Microsoft Corporation
    System Name TIMMY-SHERRY
    System Manufacturer Dell Computer Corporation
    System Model Dimension 2400
    System Type X86-based PC
    Processor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2192 Mhz
    BIOS Version/Date Dell Computer Corporation A02, 7/31/2003
    SMBIOS Version 2.3
    Windows Directory C:\WINDOWS
    System Directory C:\WINDOWS\System32
    Boot Device \Device\HarddiskVolume2
    Locale United States
    Hardware Abstraction Layer Version = "5.1.2600.0 (xpclient.010817-1148)"
    User Name TIMMY-SHERRY\Owner
    Time Zone US Eastern Standard Time
    Total Physical Memory 256.00 MB
    Available Physical Memory 27.59 MB
    Total Virtual Memory 879.64 MB
    Available Virtual Memory 376.02 MB
    Page File Space 625.64 MB
    Page File C:\pagefile.sys
  • mombodog

    2 Intern

    •

    12735 Posts

    326

    0

    Posted June 18th, 2007 22:00

    Please Post your model of Dell and what OS you are using.
  • mombodog

    2 Intern

    •

    12735 Posts

    326

    0

    Posted June 18th, 2007 23:00

    Thanks, now was this floppy drive already installed and quit working, or are you trying to add one to the PC?
  • .SevSaint

    12 Posts

    326

    0

    Posted June 19th, 2007 00:00

    i just reinstalled windows xp about 2 months ago. I had a virus and just reinstalled whole system. Before then it worked.
    When i checked under the BIOS i got 1 of 2 options listed as
     
    "Not installed"
    So i am assumming that it didn't reistall or something..
  • mombodog

    2 Intern

    •

    12735 Posts

    326

    0

    Posted June 19th, 2007 01:00

    Try this, enter the bios
     
    1. Highlight Drive Configuration and press .

    2. Use the left and right arrows to change Diskette Drive A from Not Installed to 3.5 inch, 1.44 MB.

    3. Press .

    4. Highlight Integrated Devices (LegacySelect Options) and press .

    5. Make sure that the Diskette Interface entry is set to Auto. If necessary, use the left and right arrows to set it to Auto.

    6. Press .

    7. Press .

    8. Press to save changes and exit.

      The computer restarts.
  • .SevSaint

    12 Posts

    326

    0

    Posted June 19th, 2007 03:00

    When i try to use a drive it gives me the following error message

    No ID address mark was found

    This happens when i chose to "send" a file to the "a" drive.

    I also checked my settings and they are set like you said and still nothing. And im using bran new 1.44 floppy disks.

     

    Thanks for all the help.

  • mombodog

    2 Intern

    •

    12735 Posts

    326

    0

    Posted June 19th, 2007 04:00

    Same error when you copy and paste, drag also?
     
    Probably a bad drive.
  • .SevSaint

    12 Posts

    326

    0

    Posted June 19th, 2007 04:00

    well my problem is a little bit different when i try to copy, paste
     
    it sits there for about 1 minute.
    then the menu pops up only to quickly self minimize.
     
    i can chose file/format once i highlight the drive. but it says
     
    was unable to format
     
    might be a bad drive...
    also im currently having troubles right clicking on my network modem dial up connection..
    its doing nothing as well.