UNSOLVED

hortnut

updated

22 years ago

H

hortnut

5 Posts

0

3018

September 7th, 2004 20:00

HDD in Latitude CP m233ST involved in shocking incident.

Just as this the old trusty workhorse was being brought to the office for backup, it fell off pickup - cracked case, obliterated display but IBM Travelstar p/n 21L9717 [4.3 or 4.8 gig. dependending what site getting specs from off 'google', seems to have made it.

Stripped to bare bonesget some but not all lights, cannot seem to switch to crt.

So question is what will this HDD fit in to see if it will boot. Cannot hear hdd power up , but there does seem to be damage to the MB and hence the controllers.

Googling came up with Dells, Acers and others. What about the newer Inspirions and Latitiudes? Has there been a change in the number of pins since the Latitude CP 233 and this little HDD are there other considerations to consider before I go expermenting with this drive on other machines.

Appreciate your collective wisdom on this, as we do have some important things on this drive.
  • JersWork

    770 Posts

    121

    0

    Posted September 7th, 2004 20:00

    Well,  that drive will fit into many Dell notebooks (and notebooks by other makers as well).  IIRC,  the druve you have is probably a 12mm drive,  but it may be a 9.5mm drive.  I know that the Latitude C8x0 series notebooks (and the corresonding Inspiron 8x00 systems) can still take a 12mm drive,  but many newer systems will only take a 9.5mm drive.

    You can also use an external 2.5" HD enclosure to connect your drive to just about any PC with USB or Firewire ports,  or buy an adapter to use it an in internal 3.5" HDD in your desktop PC.  The external enclosures run about $30 for a USB 1.1/2.0/Firewire case,  and the 3.5" adapter goes in the neighborhood of $10.  I currently use 3 of the external enclosures for my system allowing me to use my "older drives" (80GB 5400RPM and 80GB 4200RPM) as "spare storage" and use my 60 GB (7200RPM) drive as my main boot drive.

  • hortnut

    5 Posts

    121

    0

    Posted September 9th, 2004 02:00

    Thanks for your quick and very informative reply - just the details I needed.

    Again a big thanks