Burning files to a CD-RW but the files keep saying read only....
i have an inspiron 5100. I burnt a word document to a memorex CD-RW. when i go to delete that document it says it can't be deleted because it is a read-only. why is this happening? i even checked the attributes of the file - read-only is not checked off. i thought the point of getting CD-RW's was to be able to delete certain files when needed. i was able to erase the whole cd though.
Thank you for using the
Dell Community Forum. The CDRW cd is behaving normaly.
You cannot selectively delete files from a CDRW cd.
You can only wipe the whole thing clean, and write new files to the cd.
The purpose of a CDRW cd is to allow you to re-use the cd over and over again.
So once the cd gets full and you copy the data to another place, you can wipe the cd and write
new data to it. CDRW cds allow you to do what a CDR cd does not, use the cd over and over again.
Once a file is written to any CD, whether CDRW or CDR, it is automatically write protected.
This is normal behavior and a limitation of the technology.
I tested it on a Verbatim 4X CDRW cd I have, I could not find any way to simply delete a single file.
I've been using an HP CDWriter for about 3 years now, and I have never had a problem deleting individual files from CDRW disks that I have created..... I do it all the time. I guess the limitations to which Karen refers are with the software that Dell provides for the Writer.
I keep all of my files on a cd as a backup and add and delete on a daily basis to keep things current. I think that it would be helpful for Karen to check on her information and let us know if my information is on target or wrong.
Sorry, after some further testing I need to re-state my statement that I made previously in my stated statement.
I did a little testing with different burning applications to get to the bottom of this question.
Windows XP:
Windows Xp contained a built in burning engine.
You can use this built in engine to erase a CDRW cd and also write files to the cd.
If you use the Windows XP built in engine, you will not be able to delete any files from the CDRW cd.
You will need to totally wipe the cd clean, in order to delete any files.
Roxio Easy CD 5.X
Dell OEM Roxio Easy CD Creator 5.X basic comes with Direct CD.
If you use Direct CD to format the CDRW cd, you can "drop" files onto the cd from any application.
If the CDRW cd is also formated using Direct CD, you can delete any individual files from the CD.
But, the trick is that the cd must be formated with Direct CD.
Some older systems may also not be able to read a CDRW cd that has been formated with Direct CD, if
Direct CD is not installed on that system as well.
Most newer systems should be able to read a CDRW formated with Direct CD even if Direct CD is
not installed on that system.
Nero Burning Rom 6.X
Didn't get to do any testing with Nero.
Windows XP:
Windows Xp contained a built in burning engine.
You can use this built in engine to erase a CDRW cd and also write files to the cd.
If you use the Windows XP built in engine, you will not be able to delete any files from the CDRW cd.
You will need to totally wipe the cd clean, in order to delete any files.
---------------------------------------------------------------------
Roxio Easy CD 5.X
Dell OEM Roxio Easy CD Creator 5.X basic comes with Direct CD.
If you use Direct CD to format the CDRW cd, you can "drop" files onto the cd from any application.
If the CDRW cd is also formatted using Direct CD, you can delete any individual files from the CD.
But, the trick is that the cd must be formatted with Direct CD.
Some older systems may also not be able to read a CDRW cd that has been formatted with Direct CD,
if that system does not have Direct CD installed as well.
Windows XP includes the UDF reader files, so a cd formated with Direct CD should be accessed with no problem in WinXP.
Most newer systems should be able to read a CDRW formatted with Direct CD even if Direct CD is
not installed on that system.
Note: (I found the following about Direct CD)
Please note that you must always eject the CD from the writer before powering down your system.
There is a small amount of UDF data that must be written to the disk to "finish" the session so that it will be recognized by DirectCD the next time it is inserted.
When Adaptec DirectCD refuses to format a CD-RW for packet-writing, it's possible that the disc is not completely blank. This may happen because you chose the "quick" option when you last erased it.
The quick-erase option only erases the lead-in area to make the hardware and software think the disc is empty. This is fine if you're going to use the disc for "normal" writing as a CD-ROM, audio disc or whatever.
---------------------------------------------------------------------
Nero Burning Rom 6.X
You can erase files from a CDRW cd with Nero, but the process is a little strange.
It does not seem that Nero has a true "format" process like Direct CD does.
You cannot simply drag and drop files onto a CDRW cd from Nero.
In order to add new files to a CDRW cd you actually have to choose "Data CD" and use
the normal burning process to add files to the cd. Roxio on the other hand lets you
drop files from any application you wish. If you have Nero installed on the system, you
can "Send TO" files to the CDRW CD, but it defaults to the Windows XP burning engine to burn the
files onto the cd. Once you have "Erased" the CDRW with Nero, you can add files as you wish
as long as you leave the "Session Open". If you close the session then you affectively close the
cd and you cannot add more files to the cd unless you erase the cd again.
To erase files from the CDRW cd using Nero I had to do the following.
-Burn the files onto the cd (leaving the session open).
-Had to go back into Nero and choose DATA CD.
-It shows the files that are currently on the CD.
-Choose the files you don't want and click Delete.
-Then finish the burning process as you would normally.
Nero simply deleted the "fat table" that states where the files are stored.
Then it simply re-writes the files you want to keep and the new "fat table" back to the CDRW cd.
I know this because under disk info it showed two sessions on the cd.
But, if you look at the cd through "My Computer" you only see the files that you burned on the last session.
This also means that every time you burn new sessions to the CDRW cd, the available space on the cd gets smaller and smaller.
In order to get back the full space available on the CDRW cd, you must erase the whole cd.
---------------------------------------------------------------------
Sonic Record Now:
Sonic Record Now, includes Sonic DLA which is their version of Roxios Direct CD.
If you install Sonic Record Now and have Roxio also installed on the system it will ask you to remove Roxio because it states they are not compatible together.
You can choose to remove Roxio at that time, or you can remove it later, but you must remove it before installing Sonic Record Now.
The "Erase Disk" feature of Sonic Record Now seems to be a lot faster then the Roxio or Nero "Erase Disk" feature.
The Sonic DLA feature can be accessed by right clicking on your CDRW drive and clicking "FORMAT".
You must perform a FULL format with Sonic DLA before the Quick Format option will be available.
You must format a CDRW CD before you can "drag/drop" file to it just like you would with Roxio Direct CD.
Once you have formatted the CDRW CD you can add files to the cd from any application by using the "Send To, DLA Drive X" option.
Sonic DLA allows you to erase files from the CDRW CD just like Roxio Direct CD does.
It is just as easy too, you simply browse the cd from My Computer, choose the file you want and press Delete.
---------------------------------------------------------------------
Note:
Fully formatting a CD takes quite a while.
This is totally dependant on the CDRW write speed of your drive and the speed rating of your CDRW cd.
In my case I am using a 4X CDRW cd with a 10X CDRW writing drive.
It takes about 40min to fully format a CD using this configuration.
Sonic DLA did take less time, it took about 20min with this configuration.
Unlike Roxio Direct CD and Sonic DLA, Nero does not seem to have a "format" option to drag and drop files onto the CDRW cd.
If anyone has any information contrary to what I have stated about Nero, your input is welcome.
Thanks very much Karell....... Based on your research I'm getting a great education about the limitations and quirks of the various software used in burning CD's..... I appreciate your thorough and complete investigation into this topic.
Karell
2 Intern
•
2544 Posts
1082
0
Posted December 10th, 2003 11:00
Thank you for using the Dell Community Forum.
The CDRW cd is behaving normaly.
You cannot selectively delete files from a CDRW cd.
You can only wipe the whole thing clean, and write new files to the cd.
The purpose of a CDRW cd is to allow you to re-use the cd over and over again.
So once the cd gets full and you copy the data to another place, you can wipe the cd and write
new data to it. CDRW cds allow you to do what a CDR cd does not, use the cd over and over again.
Once a file is written to any CD, whether CDRW or CDR, it is automatically write protected.
This is normal behavior and a limitation of the technology.
I tested it on a Verbatim 4X CDRW cd I have, I could not find any way to simply delete a single file.