Hi. I've had SCG5 up and running as a Hyper-V VM for a couple of years now, it's been fine. We are doing some segmentation work on our network, so I put SCG5 in a new vlan. I used the yast tool to change the IP address, subnet mask and default gateway of SCG5, that all went fine, SCG5 was pingable afterwards. and the web interface on port 5700 was working. But I noticed something weird in my firewall logs. With the SCG5 VM running, the firewall traffic from SCG5 is just it talking to our internal DNS servers and some Dell IP addresses. But once I log into the web interface, I see SCG5 trying to make an SSH connection to its old IP address, which does not exist any longer. And the firewall is denying it all. Why is SCG5 doing this?
DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
0
0
Posted May 22nd, 2025 15:14
Hello,
The latest version is SCG 5.28.
You can download the version you need here:
Secure Connect Gateway Virtual Edition 5.28.00.14 for Microsoft Hyper-V Systems
Secure Connect Gateway Virtual Edition 5.28.00.14 for VMware Systems
https://www.dell.com/support/product-details/en-us/product/secure-connect-gateway-ve/drivers
Be sure to check the System requirements when deploying. Pages 20-23
Secure Connect Gateway 5.x — Virtual Edition Deployment Guide
https://dl.dell.com/content/manual42795920-secure-connect-gateway-5-x-virtual-edition-deployment-guide.pdf?language=en-us
Additional resources:
Secure Connect Gateway - Virtual Edition Support Information and Documentation
https://www.dell.com/support/product-details/en-us/product/secure-connect-gateway-ve/docs
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!