3010cn toner pop-up monitoring window /Printer Status
Hello,
How do i check for toner volume?
when we got our 3010cn color printer, a window would come up with each print session and showed the amount of toner left as well as another window with a link to order more from Dell. However the pop-up no longer occurs and I haven't found a way of retrieving that information now that I want it! When selecting printer preferences, I find the Printer staus button ineffective. It fails to find the printer. It goes to a search printer window, fails to find it in broadcast mode and i don't know what to specify for its address. However it has no problem printing. As far as I know the adress is found automatically. Why then can it not report the printer's status?
It sounds as if you need to reinstall the software that came with your printer on your computer. That "pop-up window" is part of the printer managemant software.:emotion-1:
I would agree with the last responder..... the toner status monitor might need re-installed.
However, if your printer is network connected, there is a simpler way. Just open an Internet browser window and enter the IP address of the printer in the browser URL area, press Enter or click GO. The printer status web page should be displayed which will show the current toner levels.
Yes its connected to one computer but to another through a network router. I double checked the printer network settings and TCP/IP is set for AutoIP. So how would i find the adress for URL?
The printer was installed to a port on our new computer however i don't see any management software on it. Unfortunately, I can't find the CD that came with the printer. Can this be downloaded?
Please elaborate, what does this mean?: "Yes its connected to one computer but to another through a network router". What kind of cable is actually plugged into the printer? USB or Network(RJ45)
The IP address is listed on the Printer Settings page which can be printed using the printer control panel.
The 3010cn printer is connected directly by USB to the new computer and is shared and accessed by the old computer through the router that both computers network to(RJ45).
When I print out my printer settings I see a MAC address but the IP is AutoIP and shows 0.0.0.0, with the same subnet mask and gateway. I tried using the MAC address but no response?
And connected as such...... you will never get a response.
When the printer is connected using USB to a PC, it is considered a "local connection", not a network connection and will never get an IP address. Also, the PC that the printer is connected to must remain on for any other users on your network to access and print to (assume) that shared device.
If your printer is anywhere in the vicinity of the router, the most efficient means of connection would be to remove the USB cable and use a network cable from a LAN port on your router to the Network port on the printer.
Thankyou. Good information! I had bought my router with a USB port available for a print server and tried to set up the printer through USB cable to the router in order to network my other computers. However I was unsuccessful, so went local connection to one and shared it over the network with others. And yes I do have to keep the primary computer on when printing from the others. I would prefer it to work through the router's USB port but will try your recommendation with RJ45. (because my son's laptop is presently on the only other available network port)
What setting changes are required to go RJ45 to the printer?
OK, now I understand a little more about your config. What model router is this? If it has a USB Print-Server port, then you should be able to use it as well as any other users on your network.
But in case you can't, just plug the printer into one of the router's LAN ports then re-install the printer drivers on each of the client PC's. If you use the CD, it should auto-run...... use the network install path. If the printer is not detected automatically, use the IP address that will be assigned to the printer after you connect it to the router.
steigerhouse
6 Posts
518
0
Posted December 28th, 2009 16:00
It sounds as if you need to reinstall the software that came with your printer on your computer. That "pop-up window" is part of the printer managemant software.:emotion-1: