I have a problem exactly as posted in this thread: http://en.community.dell.com/support-forums/storage/f/1216/p/19499337/20333114.aspx (Controller entering SODReboot lockdown state..) From the thread I understood that I need to run command lemClearLockdown from serial shell. But as the author of the topic I cannot log into the shell: after pressing Ctrl+Break in HyperTerminal and entering S nothing happens (no password prompt, cursor just moves to the next line).
So, could anybody help me and explain, how can I login into the shell to clear the lockdown state?
You mention that you are using HyperTerminal. I have ran into some issues when using that in the past. Can you install Putty and see if you get anything different when you try to access the serial shell?
I've tried Putty yesterday, but nothing changed - after pressing S there is no password prompt, cursor just moves to the next line. But the lockdown problems is already solved by Dell technician over webex, so I don't need this anymore (probably, until next lockdown :-). Thank you for help.
Kenneth, please, send me an email (nt-gomel*at*mail.by) with the steps on how to get the serial shell connection so you can clear that error log. I cannot log into the shell: after pressing Ctrl+Break in HyperTerminal and entering S nothing happens (no password prompt, cursor just moves to the next line).
rather than having to type in a capital S, the 'console only' setting just drops you straight to a shell upon booting. (might still have to send a break, i dont remember)
DELL-Kenny K
1 Rookie
•
685 Posts
1935
0
Posted August 7th, 2013 10:00
I will be sending you an email with the steps on how to get the serial shell connection so you can clear that error log.