UNSOLVED

Diverking

updated

12 years ago

D

Diverking

5 Posts

0

6194

March 8th, 2015 15:00

MD1000 empty slots are still blinking amber

Hi,

I've a MD1000 and R510 attached via Perc 6/E (latest FW 6.3.3) to one EMM (split mode). Both EMM are powered. Second EMM is not cabled and not in use.

First 3 slots are in use with 2TB disks. Slot 3-7 (Sata) are empty and blinking amber.

I configured de MD1000 with Ctrl-R Raid 5 and 3 disks and ran initialization on the created V-group

After starting up the MD100 shows a green LED (first EMM) and a blue LED. After 1 min the empty slots starts blinking amber although no disks are present and the status LED starts also blinking amber

How can I fix the amber lights and get the status LED back into blue?

When I got this MD1000 slot 0-2 where originally SATA and 3-15 SAS slots. I replaced slot 3-7 with SATA for future usage.

Greetz Martin

  • DELL-Sam L

    Community Manager

    •

    8149 Posts

    •

    34712 Points

    407

    0

    Posted March 10th, 2015 14:00

    Hello Greetz Martin,

    The drives that you put into the slots 3-7 were they Dell certified drives with dell part# on them? the reason that I ask this is that with the MD series you have to use drives that are dell certified to work with the MD otherwise the drives won’t power on & be seen correctly. Here is a link to the support matrix for the MD1000 and if you look on page 5 it list out the compatible drives for your MD1000. http://downloads.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md1000_Service%20Manual_en-us.pdf

    Also you stated that you changed the drives that were in slots 3-7 to SATA., did you also add the interposer boards to the back of the drives?

    Please let us know if you have any other questions.