I have a Dell Powervault TL2000 with an IBM 3580-5H LTO 5 tape drive and I would like to add a Dell iSCSI card, but I have a ton of questions that I can't seem to find the answer to:
1) What is the EXACT procedure for adding an iSCSI card to a TL2000 that never had one installed?
2) Do both network ports need to be connected for it to be accessed at 10.10.10.10?
3) Does the SAS port need to have a drive connected for the iSCSI card to respond to 10..10.10.10?
4) Which network adapter (close the SAS port or the one next to it) on the iSCSI adapter is used for web management at 10.10.10.10 - or doesn't it matter?
5) When you initially plug in the iSCSI card, will the TL2000 recognize the card in any way? Does it show any confirmation on the tape library's web management page that the card was added?
6) Do I need to flash the firmware of the tape library for it to recognize the iSCSI card, or is a completely independant device?
7) Is it common practice for network admins to change the default IP address of the iSCSI adapters? If so, what would be a common IP address range that would be used?
8 Does the iSCSI card respond to pings? Will it respond to port scans of 80(http) and 3260(iSCSI)?
9) Does the iSCSI card show any network activity when it boots up, or does it only respond to requests?
10) If you had to scan the network to find the iSCSI card (if the default IP address of 10.10.10.10 was changed to something else) - what program do you recommend? Better yet, if you did scan your network to find the iSCSI card - what software did you use?
I'd love to hear from someone who has personal experience adding an iSCSI card to a Powervault TL2000/4000 because I'm on my second iSCSI card and it seems to be doing the same thing as the first one I thought was defective - nothing. I'm not sure if my TL2000 is defective; if the second card is bad, or I'm just an idiot with 36 years of professional IT experience and I'm missing something simple...
First when adding your ISCSI card to your TL2000 you need to use the tool that comes with the card to insert into your TL2000. The tool that should come with the card is used to hold the card in your TL2000 so the bridge can be inserted securely. Once the card has been inserted and is secure then you want to use the nic port that is next to your sas port on your ISCSI bridge. You should be able to ping 10.10.10.10 when directly connected to the bridge. Once you go to that IP address you should get a login for the bridge.
No you should only need to connect the left network port, if looking at the bridge in the back of your TL2000. The left port is the default port.
Yes you want to have the drive connected to the bridge before you power on your TL2000.
The left port is used for web management. Once ISCSI bridge has been configured you can set it to either network port.
The ISCSI bridge is not seen any different by your TL2000. It will still show the drive as connected via sas.
If you are running a really old version of firmware then I would upgrade the firmware. In most cases you should not need to upgrade the firmware.
I can say from the customer that I have worked with that use TL2000/TL4000 & ISCSI bridge that they do change the IP address to an IP that works in there network.
Yes the bridge should respond to ping.
When you are in the web interface for your ISCSI bridge it will show network information when connected.
Most of the time I have had customers connect a laptop to their ISCSI bridge, & do a scan that way till they have found the IP address.
Please let us know if you have any other questions.
I finally found the IP address of the bridge and I can access the login page - but the default password doesn't work. I have a challenge key: AYMHFR5TDHH
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
1123
0
Posted September 5th, 2017 10:00
Hello BSD2000,
Please let us know if you have any other questions.