1. What Hard Drive Configuration does the PowerEdge 750 support?
The PowerEdge 750 server will support a maximum of two (2), 1-inch Hard Drives. The available controllers are Serial ATA (SATA) and U320 SCSI. Hot-Swap capability and / or IDE support is not an option on the PowerEdge 750.
The PowerEdge 750 server shipped in 2 configurations.
Cabled (NON-Hot Swap Capable) SCSI Hard Drives SATA Hard Drives
It is possible to convert a SATA system to Cabled SCSI (or vice-versa).
SATA and Cabled SCSI Hard Drives in the same system may be possible, but it is NOT a validated configuration.
Suitable SATA Hard Drive sizes range from 40GB to 250GB. Suitable SCSI Hard Drive sizes range from 18GB to 146GB.
While larger sized Hard Drives may work with your system, Dell has not validated or tested such drives and cannot guarantee their functionality.
Below is a list of the currently available Hard Drive Customer Kits we offer for the PowerEdge 750.
SATA Hard Drives: These Customer Kits include the mounting screws: 340-9839  40GB,SATA,7.2K 340-9842  80GB,SATA,7.2K 340-9870  120GB,SATA,7.2K 340-9871  250GB,SATA,7.2K Other SATA Hard Drives may be available from spare parts as refurbished.
Cabled SCSI Hard Drives: These Customer Kits include the mounting screws and an auxilliary power cable: 340-9829  18GB,U320,SCSI,68P,15K 340-9821  36GB,U320,SCSI,68P,10K 340-9828  36GB,U320,SCSI,68P,15K 340-9822  73GB,U320,SCSI,68P,10K 340-9807  73GB,U320,SCSI,68P,15K 340-9804  146GB,U320,SCSI,68P,10K Other Cabled SCSI Hard Drives (68 pin) may be available from spare parts as refurbished.
Drive Installation Instructions
<ADMIN NOTE: Broken link has been removed from this post by Dell>
Please note that the contents of the above part numbers are subject to change over time, as is the availability of those parts.
We recommend contacting our Spare Parts department at 1-800-372-3355 for pricing, availability, and purchasing of all the above parts.
Yes, there is a good chance that even up to 2TB will be fine ... Dell, however, only lists as compatible drive sizes they tested and validated during the sales lifetime of the server, and they do not retroactively update their spec sheets and documentation, in general, as technology progresses beyond the server offering and becomes the user's responsibility to test unsupported configurations. (Also, did you realize that thread is like 9 years old?!)
I was looking for the same information. Our 750 is on its 3rd drive. The last upgrade occurred when it got infected with malware. I installed a 1TB drive scavenged from a dead NAS. It worked. I didn't think about limits when I installed the 1TB drive. I'm thinking about limits now: I'm going to install a 4 TB secondary drive to serve as a mirror for our disk based backup system. The present NAS mirror is too slow. I will report the results.:emotion-15:
The New Guy1
6 Posts
1054
1
Posted May 22nd, 2013 12:00