UNSOLVED

brywilk

updated

3 months ago

B

brywilk

5 Posts

0

25352

June 30th, 2004 14:00

4600 bios, per firmware upgrade

Hi everyone,

I was just wondering if there was a proper procedure to upgrading the bios and perc firmware on a 4600.

I was just going to upgrade the BIOS first (A11), then install and upgrade the perc firmware (2806089). Or should I install the perc update first, or does it even matter.

thanks in advance
Bryan
  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    295

    0

    Posted June 30th, 2004 15:00

    Hi,

    The system upgrades are independant of the Perc upgrades, but it is important to do each section in the order listed.

    System Upgrades:
    Dell Server System BIOS, PowerEdge 4600, A11
    FileName: PE4600-BIOSA11.exe[629 KB]     &nbspRelease Date: 5/26/2004

    ESM Firmware, PowerEdge 4600, A31
    FileName: PE4600-ESMA31.exe [224 KB]     &nbspRelease Date: 11/24/2003

    (if installed)
    Dell Remote Access Controller - DRAC III, Firmware, v.3.12, A01
    FileName: d_0426v312_d3.exe [2 MB]

    Perc Upgrades:
    Adaptec Perc 2/si, 2/qc, 3/si, 3/di, Driver, Windows 2000, v.2.8.0.6085, A15
    FileName: W2K-2806085.exe [259 KB]

    Adaptec PERC3/Di, Firmware, PowerEdge 4600, v.2.8.0.6089, A06
    FileName: PE4600-280_6089.exe [1 MB]

    Thanks for using the Dell Community Forums!

  • brywilk

    5 Posts

    295

    0

    Posted June 30th, 2004 16:00

    thanks for the response. Will I need to re-install the FAST utility after or is there a newer version (or application) that I should install.

    Bryan
  • cooledit

    25 Posts

    295

    0

    Posted June 30th, 2004 17:00

    hi, there

    installation order:

    unistall Dell Array Manager, Dell Server Manager before anything else

    BIOS, ESM, PERC driver for OS, PERC frimware, management systems

  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    295

    0

    Posted June 30th, 2004 17:00

    Hi Bryan,

    Adaptec has stopped supporting FAST, however the FAST CLI is still available. I would recommend uninstalling FAST altogether and installing Dell OpenManage Array Manager. The Array Manager not only manages Addaptec based Perc controllers, it also manages the LSI Logic (formerly AMI) based controllers.

    I will provide links to both:

    Adaptec Perc 2/si, 2/qc, 3/si, 3/di, FAST/CLI, Windows NT 4.0, 2000, 2003, v.2.8.0.6046, A13
    FileName: NT_App_280-6046-A13.exe [5 MB]
    FAST / CLI Documentation:
    http://docs.us.dell.com/docs/storage/romb26/cli-ug/index.htm

    Dell OpenManage Array Manager v.3.5.0.555.4, A02
    FileName: a350a02.exe [78 MB]     &nbspRelease Date: 2-23-2004
    Array Manager Documentation

    Thanks
    Mark
  • Quino

    153 Posts

    295

    0

    Posted July 19th, 2004 10:00

    The updates are not always independent of each other.

    The perc 2.8 firmware has a minimum BIOS support level it requires.... so typically you always want to update your BIOS first.

  • 429mike

    1 Message

    295

    0

    Posted August 17th, 2004 22:00

    the one feature from FAST i am still looking for in the array manager (besides a cleaner interface) is e-mail notification of errors/failures .... does array manager do this and i am just missing it? messing with SNMP to make an e-mail seems alittle much....