I've had this problem after a battery failure or when I've been disconnecting things inside the case on a 4400. So if the same holds for the 2400, you will need to flash the ESM firmware to the latest version and that should take care of it while the system is powered up. You will likely need to replace the battery on the motherboard. Then the above remedy will hold between power-off cycles.
--Walt
If you have a CD burner and software to burn, not simply copy, an ISO, go to the follwoing link and download the Dell "Server Update Utility". In the event you get a message "Can Not Update", you would need the ISO at the 2nd link provided, the "Server Updates Prerequisites" CD.
iacullwd
25 Posts
108
0
Posted August 30th, 2006 17:00
--Walt