UNSOLVED

Uryene

updated

19 years ago

U

Uryene

1 Message

0

8600

July 23rd, 2007 21:00

PERC trouble on PE2550 w/new motherboard

Hello;
I had to replace the motherboard in a PE 2550 recently, and I'm having trouble enabling the PERC 3/Di.

I've moved all the hardware over (including the RAID key, RAM and battery) but can't seem to get the system to enable/recognize the controller.

The system POST shows messages from the Adaptec AIC-7899; the usual PERC messages aren't coming up and the RAID option isn't available in the BIOS setup, only SCSI.

Is there something I'm missing?

Thanks,
Lance

Message Edited by Uryene on 07-24-2007 09:06 AM
  • DELL-GaryS

    777 Posts

    336

    0

    Posted July 25th, 2007 22:00

    Hi Lance,
     
      Look at your SCSI cable where it plugs onto the SCSI BP, if the ribbon is peeled back at the corners, you might want to replace the cable. Order P/N 7N428 in the US.
     
      Next check your RAID key, it's really easy to get it off by one pin.
     
     Lastly look at the memory DIMM, did you get it mixed up with the regular system memory DIMMS?
     
    Good luck,
    Dell-GaryS
  • barhampa

    718 Posts

    336

    0

    Posted July 27th, 2007 00:00

    You will need to enable RAID  in Setup under Integrated Devices.