UNSOLVED

RobDust

updated

8 years ago

R

RobDust

9 Posts

0

2483

February 22nd, 2019 06:00

PERC H730P 2xSAS in Raid 1, want to add 3xSSD in Raid 5

Hey, we have an PERC H730P with 2xSAS in Raid 1. is it possible to add 3 Additonal SSD in a Raid 5?

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    2300

    0

    Posted February 22nd, 2019 08:00

    Hi Rob,

    If you install OpenManage, you should have an option to reconfigure the array under the "Storage" section. It should let you add the additional drives, as well as change the RAID level. It can also be done from the F2 menu, you would then go to the devices section, then the PERC. I'll share a video that walks through the process click by click. 

    https://www.youtube.com/watch?v=7SAr8Qzum8s

  • RobDust

    9 Posts

    2244

    0

    Posted February 26th, 2019 07:00

    Hi, i dont want to change and reconfigure the existing array, i want to have simultaneously an additonal array. 2xSAS in Raid 1 And 3xSSD in Raid 5
  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    2241

    0

    Posted February 26th, 2019 07:00

    That will make it even easier, then. Once the drives are installed, you can create a new virtual disk from OpenManage, the iDRAC web interface, or the PERC configuration screen. If you use OpenManage, you would go to "Storage," first. The option to create a new virtual disk should either be under physical or virtual disks. You would just use that wizard to select the 3 disks and set the RAID volume, and that would be all there is to it.

    https://www.youtube.com/watch?v=cOhiacwKfks

    https://www.dell.com/support/article/us/en/19/sln132533/how-to-initialize-and-create-a-virtual-disk-with-a-dell-poweredge-raid-controller-perc-?lang=en