I'm trying to find out if any of the slots available on the R620 (12G) and R630 (13G) are capable of suppling a FusionIO card with 75W of power. Currently the cards are in slots that are only supplying the device with 25W.
I'm fairly certain that the PCIe slots are capable of supplying the 75w of power to the card. By default the fusion IO will only draw 25w from the PCIe slot. You need to go into the fusion IO management interface and enable the option to draw all power from the PCIe slot.
I'm reluctant to override the settings for the device without knowing power capabilities of each slot, as well as the entire system. Also why is the BIOS not reporting the correct information/how can I inspect what these values should be? I can't find any reference to the power limits in the technical specs or the BIOS.
Here's the output of fio-status/fio-pci-check from an R630, showing that the slot is only able to provide 25W.
fio-status -a ... PCI:03:00.0, Slot Number:3 PCIe slot available power: 25.00W PCIe negotiated link: 8 lanes at 5.0 Gt/sec each, 4000.00 MBytes/sec total
Non Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported.
That statement is only valid for operation outside the standard temperature range (Expanded Operating Temperature).
NOTE: Outside the standard operating temperature (10 °C to 35 °C), the system can operate down to 5 °C or up to 40 °C for a maximum of 10% of its annual operating hours.
Daniel My
12 Elder
•
6204 Posts
2990
0
Posted July 22nd, 2015 16:00
Hello Drew
I'm fairly certain that the PCIe slots are capable of supplying the 75w of power to the card. By default the fusion IO will only draw 25w from the PCIe slot. You need to go into the fusion IO management interface and enable the option to draw all power from the PCIe slot.
Thanks