UNSOLVED

Ranjith_26

updated

1 year ago

R

Ranjith_26

1 Rookie

•

3 Posts

•

2 Points

0

810

July 24th, 2024 10:18

Memory Slot A1 and A2 not Showing

Hi,

  I get a error Message UEFI10144 : one or more memory error has occurred in memory slot

Model : Power Edge FC630

I replaced New RAM , BIOS and IDRAC are updated to latest version.

I using 32 GB ECC RAM  slots using DIMM (A1,A2,A3,A4 & B1,B2,B3,B4) total of 256GB

But now it showing 192GB because of DIMM A1 and A2 slot not showing

I dont think it has a slot problem

I tried DIMM (A5,A6,A7,A8 & B5,B6,B7,B8) slots it showing no memory found It has to config in BIOS?

I have same problem for other servers also when i update BIOS to Latest then it again show and 4 servers remain same after BIOS update also

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    0

    0

    Posted July 24th, 2024 14:41

    Ranjith_26,
     
    Would you confirm some details for me?
     
    What is the Memory Mode showing as in the BIOS?
    What is the specific part number for the dimms, so I may verify compatibility?
    How many processors are currently installed?
    Have you individually tested the dimms, in slot A1 for single CPU, or A1 and B1 on dual CPU?
    Are these dimms an upgrade, if so do the original dimms have this problem as well?
     
    Let me know.
     

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Ranjith_26

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    0

    Posted July 26th, 2024 05:57

    @DELL-Chris H ​ 

    Hi,

    1) I attach the Screen Shot for memory mode in BIOS

    2) RAM using :

    https://a.co/d/euYjbIY

    3) 2 Processors are installed (Intel(R) Xeon(R) CPU E5-2673 v4 @ 2.30GHz)

    4) No i tested for 2 CPU RAM installed in A1 and B1 ((A1 not showing))

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    0

    Posted July 26th, 2024 07:58

    Hi,

     

    Do have other CPU to test with? I check E5-2673 v4, but it's not listed for FC630. E5-2670 v3 is. 

     

    Was this working before? Can try swapping CPU to check the issue. 

     

     

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    0

    Posted July 26th, 2024 08:05

    I just noticed one of the picture you have screenshot has your server service tag. It is considered your private info on a public space. I would suggest removing it to safe keep your informations. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • Ranjith_26

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    0

    Posted July 26th, 2024 10:24

    @DELL-Joey C​ 

    I tried with Intel(R) Xeon(R) CPU E5-2670 v3 @ 2.30GHz processor its not working still A1 and A2 slot is not showing. i attached my RAM Seatings also

  • DELL-Erman O

    Moderator

    •

    2984 Posts

    •

    14874 Points

    0

    0

    Posted July 26th, 2024 12:23

    Hi, if other DIMMs that you are sure are working do not work in A1 and B1 slots. Then the slot is suspected first. The possibility of it being from the processor channels is considered later. When compatible parts are used, the probability of a processor-related problem is less likely. The DIMM itself or the slot on the motherboard is more likely to be suspected. Also, as far as I understand, you have installed parts on the server a few times. There may have been static electricity on the server, so I recommend draining the flea power.

    1. Power the server down.  
    2. Disconnect server from all power cables, Network cables. 
    3. Hold down the power button continuously for at least 10 seconds.  
    4. Insert power cabless and network cables back to the system.  
    5. Wait about 2 minutes before powering on the server for iDRAC to be refreshed.
    6. Power the system on. 

    DELL-Erman O

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • g7rock

    1 Rookie

    •

    3 Posts

    0

    0

    Posted September 11th, 2024 06:56

    I have the same problem with my Dell G3 3500; the second dimm slot is not visible. I tested both of the 4GB RAM modules in the first slot and they worked fine. I remember it crashed with a blue screen on Windows 10 earlier, but I'm not sure how many times. I've been having issues with my Dell G3 laptop since the bios was updated automatically to the current version. Dell better fix or replace my laptop for free. When I first received this laptop, the package arrived damaged, and I spoke with the higher-up, who said that if I ever had a problem with it, I should contact him. I wished I still had his email and an extension to his department.

    (edited)

  • Kiesha325

    1 Rookie

    •

    32 Posts

    0

    0

    Posted July 21st, 2025 13:54

    I have much more interesting case. Sam error (regarding A1 and A2) is on 5!!! units of T440 and recently we got same on 1x R440. We tried everything - change CPU, change RAM, update, repurpose, reset and hard reset iDrac, power drain... And still have no soluton for it.

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    0

    0

    Posted July 21st, 2025 14:46

    Hello,

     

    Were all these working and now do not work?

     

    Have you had these systems from original order?

     

    Has anything change from original configuration?

     

    You may first try a flea power drain and Clear NVRAM:

     

    drain flea power (shut down, disconnect power cables and Network cables, hold in power button 20 seconds with cords removed).

    After flea power drain, system has to set for 3 minutes for DRAC to reset without any power plugged in.

    Then plug in NIC and power but wait 2 minutes before power on to give DRAC time to initialize.

    Check result

    .

    Clear NVRAM - there is a map under the lid to show the jumper location. Shut down, Set jumper to the Clear position, power on and Post up to the jumper error, shut down and return jumper to original location.

    Check result

     

     

    Next I would recommend bring them down to minimum to post configuration.

    Check for any bent pins in CPU and DIMM sockets.

    Test each DIMM one at a time with CPU1 and A1 socket then build out the memory incrementally.

     

     

    T440 minimum to post:

    The components mentioned below are the minimum configuration to POST. Remove anything that is not on the list.

    ● One processor (CPU) in socket processor 1

    ● One memory module (DIMM) in socket A1

    ● One power supply unit

    ● PDB/PIB and cable

    ● System board

     

    Follow system memory guidelines for installation:

    Page 63-68

    https://dl.dell.com/content/manual41802552-dell-emc-poweredge-t440-installation-and-service-manual.pdf?language=en-us

     

     

     

    R440 minimum to post:

    The components mentioned below are the minimum configuration to POST. Remove anything that is not on the list.

    ● One processor (CPU) in socket processor 1

    ● One memory module (DIMM) in socket A1

    ● One power supply unit

    ● PDB/PIB and cable

    ● System board

     

    Follow system memory guidelines for installation:

    Page 46-51

    https://dl.dell.com/content/manual43617227-dell-emc-poweredge-r440-installation-and-service-manual.pdf?language=en-us

     

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • Kiesha325

    1 Rookie

    •

    32 Posts

    0

    0

    Posted July 22nd, 2025 08:33

    Actually all that we already done. Nothing helps. 

    Minimum to post leads to critical error, because no RAM found on system, if we use slots A1 or A2. And normal boot, if we use another slots.

    Actually I haven't seen them working all normally. Would agree, that 1-2 units could be failed as they are not new. But from one batch all 5 units of T440? 

    BTW we got 2nd unit of R440 with exactly same problem.

    (edited)