I am trying to upgrade a couple of T430 server from E5-2630 v3 to E5-2699 v4
The problem I am having is, putting a E5-2699 V4 in CPU 1, the server runs ok but as soon as I install the second E5-2699 v4 I get no post. (yes I do have equal memory compliment)
I have seen T430 servers advertised on eBay with dual E5-2699 v4 CPU's so I know it can be done.
I have installed the latest Bios v 2.13.0 and the latest PET etc I have 2 x 750w power supplys setup in standalone.
E5-2699 v4 is not a supported processor for T430. Not supported does not mean it will won't work we can not guarantee that it will work as it is not validated.
Is your system boots when you install the second CPU on CPU 1 slot. This is not ensure second CPU does not have any issue. You can also try after removing all other add on cards and keeping only one DIMM per CPU and one HDD and see with this system can boot.
If you have access to iDRAC you can check the POST code and LifeCycle logs for any error message when no post issue seen with 2 CPU is installed on the server
Where can I find what actual procesors are supported on theT430 in the E5-2600 v4 range. I think its very poor on Dells part to advertise that the mother board supports E5-2600 V4 when in fact only a subset are supported, Dell should be more specific.
As far as I am aware, there isn't a published list, though Sales may be able to provide you one. I'm looking at the internal parts database, though, and happy to check it for you. As for support, we only claim support for hardware that has been through validation. For whatever reason, this specific processor hasn't been validated, so we can't claim support for it.
I'm seeing about 30 different line items just by using a V4 filter. If you can help narrow down what you're looking for, I'd be happy to share the part number for the closest matching item. If the E5-2698 V4 would work, I do see it showing official support (Dell part number KV7W3). I've got links to Intel's ARK pages below for comparison, if that's helpful.
This is normally published - and is usually more up to date then the original manual / documentation - in the "Technical Guide", but there does not appear to be one for this particular model.
Xbyte.com also lists a couple of models of the 2699v4 in their store for the T430. A couple of possibilities:
* You updated the BIOS, but did you update the iDRAC/LCC as well? * Try clearing the NVRAM using the jumpers on the motherboard. * I do not see any reference to it, so this may not be relevant to the T430 - and maybe Dylan can confirm - but there are sometimes MLK's or mid-life motherboard upgrades / revisions during the life of a server, so it is possible that a newer board (v2, II, etc.) could be required.
I do see V2 and V3 motherboards (V3 being DPN KX11M), but the documentation doesn't identify these as offering any new features/support. If you'd like, I can help you identify which board you may have, based on the original order. To do this, I'd need the service tag, but you can also find this information by entering the tag on the https://dell.to/3o97jYY site and reviewing the order there.
I think that may be the SKU that Sales uses, as opposed to the Dell Part Number that support uses. In order for me to identify the board, I'd really need either the service tag of the server, or the DPN (DPNs are always 5 character combinations). You're more than welcome to send it to me in a direct message, this way we can keep your information private. I'm happy to check multiple tags, as well, since it sounds like you have several of these to be concerned about.
DELL-Shine K
6 Operator
•
3042 Posts
3438
0
Posted September 27th, 2021 04:00
E5-2699 v4 is not a supported processor for T430. Not supported does not mean it will won't work we can not guarantee that it will work as it is not validated.
Is your system boots when you install the second CPU on CPU 1 slot. This is not ensure second CPU does not have any issue. You can also try after removing all other add on cards and keeping only one DIMM per CPU and one HDD and see with this system can boot.
If you have access to iDRAC you can check the POST code and LifeCycle logs for any error message when no post issue seen with 2 CPU is installed on the server