It works fine until I install a PCIe network card Broadcom BCM5719 quad-port. The system will not post, with error LED 2,7 indicating Memory SPD failure.
Through trial and error, this problem will go away when I remove the dimm in slot 4.
I have tried changing the order of memory sticks, nothing works. It has been consistently I have to remove dimm slot 4 to get the PCIE network card running.
So I can't fault dimm slot 4, also can't fault PCIe slot. They just won't work together.
This is so weird, like some kind of hardware limitation ???
We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.
Today I managed to borrow a PCIe Sound blaster audigy.
All 4x dimm slots works fine with the Sound blaster.
Therefore this is pointing to some compatibility issue between 7060 and Dell broadcom BCM95719 quad port card 0TMGR6 and the painful workaround is remove the dimm in slot 4 which reduce the system memory capacity.
I have an Optiplex 7060 with 4x 8GB DIMMs installed. This works fine.
I then installed an Intel X710 NIC, and now the system won't post. Same 2,7 LED code as OP. If I remove the DIMM in slot 4 the system boots up just fine and recognizes the NIC.
I'm running the latest available BIOS and also the latest NIC firmware. Any ideas for what to try, or am I just out of luck for this combination?
Last year they fob me off by saying the memory are not Dell memory. I'm not stupid enough to buy new Dell rebranded memory to prove a point.
As long as a NIC card, so far tired Intel and Broadcom cards, is installed in the PCIE slot and memory slot 4 is in use, it will not POST.
You're better off rearranging your memory mix not to use memory slot 4. Dell is a brick wall, pathetic customer service that won't (or not paid enough to) engage internal engineering, use excuses such as non Dell branded memory.
I got my machine working with a NIC and 4 DIMMs. At the suggestion of Dell support I tried swapping the NIC. Mind you, I started this upgrade with a known-good NIC, but I guess I'll try anyway... and sure enough, success!
Both of my NICs are X710-DA2 based.
The incompatible NIC is a Dell OEM card, p/n 0Y5M7N with firmware version
8.40 0x8000af82 20.5.13.
The working NIC is an Intel retail card with firmware version
8.50 0x8000b6ed 1.3082.0.
The Dell NIC works fine in a Supermicro motherboard, also with 4 DIMMs. So maybe there's something going on between the Dell BIOS and Dell NIC firmware.
same strange problem here with a DELL T40. Latest BIOS. If all 4 DIMM-Slots are populated the machine wont start with some PCIe cards present. Power LED blinks (2,7 aka SPD error).
system PowerEdge T40 (095B) memory 64KiB BIOS memory 64GiB System Memory memory 16GiB DIMM DDR4 Synchronous 2666 MHz (0.4 n memory 16GiB DIMM DDR4 Synchronous 2666 MHz (0.4 n memory 16GiB DIMM DDR4 Synchronous 2666 MHz (0.4 n memory 16GiB DIMM DDR4 Synchronous 2666 MHz (0.4 n
NOT working cards are:
- DP/N 00FCGN - 2 port DELL NIC BCM (latest FW)
- SAMSUNG MZPLJ3T2HBJR (NVMe SSD 3.8TB)
Cards mentioned above are WORKING if DIMM slot 4 NOT populated.
NIC "INTEL Ethernet Controller 10G X550T" is working fine wit all DIMM slots populated.
Same problem occurs in the HP world (In a HP ProDesk 600 G5 and in a HP EliteDesk 800 G4). 4 x 16G in 4 DIMMs. Insert a BMC5719 Quad-port NIC into any PCIe slot in the PC and DIMM3 is no longer functional. No response from HP and no identifiable work around except remove the memory from the slot with the conflict. Could be an issue for Broadcom to fix.
I just got an optiplex 7070 MT. I have the same issue. 4 16g dims work fine. but insert an intel X550 10g network card; it fails power up. Pull dimm4; it works with the network card. everything is up to date; intel 10g card is retail; with the latest firmware
DELL-Cares
Moderator
•
27843 Posts
•
745 Points
1621
0
Posted March 1st, 2021 01:00
We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice