My Dell Inspiron 6400 laptop crashes when I insert anything into the USB ports. It also crashes when I insert my SD card into the card reader. I get a blue screen. Microsoft website recommended that I use system restore, but the computer will not restore to any restore point. I'm running Windows XP home, 1 GB ram, core 2 Duo.
This started after I tried to install a driver for a digital camera unsuscesfuly. I was also given advice by Microsoft to use the Dell driver reset tool, But it is mysteriously missing. I recently reinstalled Windows (before this happened) and perhaps the reinstall was not done right (another clue to this is that since I reinstalled, I did not have the option to standby or hibernate the computer). I used the original Dell discs to reinstall.
Reinstalling again would be an option, though my last option.
All my info is backed up on Carbonite.com and an external hard drive. I also have a Ghost image of the hard drive from about 8 months ago which I tried to use but the computer will not boot with the USB HD connected. I already tried the The PC Restore procedure but it failed to initialize.
Thanks for you help.
EDIT on 2/9/10: Inserted image of blue screen error.
This is definitely a driver conflict. Yes, there seem to be enough problems to warrant a reimaging of the hard drive. I have an older version of Ghost, so I may not be able to help you there. But I suspect the reason your system is not booting with the USB drive connected is that you have the BIOS set to boot from a USB device. So go into the BIOS (F2) and check boot drives. You should normally have the CD drive as priority and your hard drive second. Be sure to disable any USB options. Then you will boot with your Ghost disc and go from there (I think).
Disable USB, diskette and HD for now. Then try to boot to your Ghost disc and see if it boots. Then you can restore your previously saved image. Don't forget to re-enable the HD in boot devices after the image is restored.
Thanks! I was able to restore my PC to the Ghost image. But I decided I wanted to start fresh again because at the Ghost restore point my PC was already running slower. So I reinstalled windows again, and I'm having trouble already. The "Standby" mode is disabled, and there is no option for "Hibernate". At this point I did not yet install the utilities CD, but last time I reinstalled windows from the CD, I had the same problem above even after installing the utilities. I'm wondering if perhaps there is something wrong with my Dell Windows CD. Any help is very much appreciated.
Osprey may reply with further suggestions, meanwhile:
Reason the Dell PC Restore (DSR) utility didn’t work was because you had previously done an XP Clean Install, which automatically overwrites the original Dell modified Master Boot Record
If that’s all you have done & the DSR partition image is still present?
Then there is a method available to repair the Dell modified Master Boot Record
The repair method is not straightforward or so successful for those who have installed boot manger programs e.g. when creating Vista/XP dual boot
Using either the DSR utility or an XP Clean Install, if done correctly, will fix any software errors
But will obviously not fix errors caused by hardware problems, have you ran hardware diagnostics?
Did you disconnect ALL peripheral devices when doing an XP Clean Install, includes any network connection?
As part of the XP Clean Install did you reinstall device drivers in the correct order?
If that’s all you have done & the DSR partition image is still present?
Thanks BELL BOY.
I'm not sure if it's present. When I reinstalled, I saw the partition for the DSR, so I would assume it is. Either way, I know I have a copy of the DSR on a ghost image.
Using either the DSR utility or an XP Clean Install, if done correctly, will fix any software errors
But will obviously not fix errors caused by hardware problems, have you ran hardware diagnostics?
Did you disconnect ALL peripheral devices when doing an XP Clean Install, includes any network connection?
As part of the XP Clean Install did you reinstall device drivers in the correct order?
I'm not sure if I did the clean install correctly. I formatted the C partition and installed the OS on that. I ran all the hardware diagnostics as soon as my first problems occurred last time around. I disconnected all connections including network, besides the laptop cooling fan which runs off the USB which I left connected. I did NOT install the drivers yet in any order, as I'm not sure how and in which order to proceed. Looking forward to your guidance, and thanks again.
E.g. for desktops you’d normally just have the monitor, keyboard/mouse connected
Assume it’s an external cooling fan that takes its power from a USB root hub port? Make sure that device is definitely disconnected
If diagnostic hardware tests are OK, then:
If you want to try fixing boot loading to the hard drive DSR image (if present) partition then use Dan Goodell’s Dsrfix toolto repair the Dell modified Master Boot Record
Read this thread, click here one of a few that includes some useful feedback
You or a friend need to have some technical ability, Dsrfix tool can be obtained here you may need to read a few times but the process is straight forward
As long as you can create DOS bootable media to repair the boot record table(s)
Otherwise if doing an XP Clean Install, the Dell procedure is here
The correct order for reinstalling device drivers using your Dell Resource CD is here
osprey4
6 Operator
•
34230 Posts
788
0
Posted February 3rd, 2010 06:00
Geek77:
What is the blue screen error?
Have you considered reinstalling the OS. The PC Restore procedure makes this fast and easy, but you need to back up your files first.