i9400 Wireless dropouts and not auto connecting (faulty 3945ABG card?)
Hi all,
I've been noticing this quite recently - previously I just lived with it, but think that it's not supposed to happen. I use the Intel PRO manager for wireless, and my router setup has not changed form my previous Toshiba which connected automatically all the time (ie boot up, then there already is a wireless link).
Now with the i9400, upon bootup I dont get a connection automatically - I have to disable and then enable the card.
I called Dell ...informed them about the problem ... and was advised that this is "normal". Then I was informed about the power settings of the card under device manager.
There are several settings for the 3945ABG card - I've manually configured all of those settings and am trying those out ....
Anyone else find that they can't automatically connect to a network on bootup?
Here's what happens for me (I have my wireless router/modem on 24/7):
1. I bootup the i9400.
2. Logon, then it initiates etc ....
3. After a while the Intel PROSet/Wireless tasktray icon appears .... usually Yellow, saying that "Wireless Networks Found".
4. I try to manuallly connect to my profile - it always fails.
5. I manually disable the Intel PROSet card, then wait 10 seconds and enable it.
6. It automatically turns green and I get a 54MB connection ....
It also works if I reset my modem at step 5 ....
I am not happy with this "function" and when I called the tech support (I have the 3 year warranty), they said that it's supposed to function like that - or change the wireless settings under the device manager.
Yes, it is set to auto connect. The last few times it has auto connected .... which is much better than before. But I still experience weirdness - just then, it connected at 18MB .... I'm about 50 cm away from the router, and with my Toshiba I always got a 54MB link.
I've tried to manually configure the card, but am not sure if that is even helping .....
try this one ...... under control panel >> network connections >>> right click on wireless network >>> properties >>> go to Authentication tab and uncheck the option "Enable network access control using IEEE 802.1X" and also if something else is checked on that window uncheck that option as well .... and then restart ur computer and see if it works for u ...
Also lemme know if u are using any router for wireless connection ..... so that we can work upon that also ...
1. Client for MS networks
2. File and printer sharing for MS networks
3. QOS Packet scheduler
4. AEGIS protocol (IEEE 802.1x) v3.4.9.0
5. WLAN Transport
6. Internet Protocol (TCP/IP)
I am using a wireless router - I think it might be related to the setting of the laptop or card and not the router - as I can access the internet from my xbox via the router, and the router settings also work on another laptop ....
Thanks for the suggestions tho - any other ideas come to mind?
Thanks again to everyone who has provided ideas - very very appreciated.
Greg16
121 Posts
233
0
Posted April 17th, 2006 00:00
Did you setup a profile to automatically connect? Is this problem only with your network, or does it happen with other wireless networks?