Alexander_Busch

updated

13 years ago

A

Alexander_Busch

1 Rookie

•

12 Posts

0

59958

October 22nd, 2013 04:00

LACP group doesn't work with 2 stacked DELL PC 6248 and 2 ESXi 5.5

I would like to use the LACP/LAG feature in vSphere 5.5. So I created a new vDS and an LAG group. 2 NICs per host should be use for that. We use 2 hosts, so in total 4 ports are involved. Basicly you can view a scheme at vmwares KB article 2051826 (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2051826)

Problem is only 2 of the links in lacp group are active, while the other 2 are inactive. Active is only one of the esx hosts, it depends which ports are going to be active first.

Any advice? Anyone have a config like that working?

Best regards,

Alex

Relevant config for switch:

!Current Configuration:
!System Description "PowerConnect 6248P, 3.3.7.3, VxWorks 6.5"
!System Software Version 3.3.7.3
!Cut-through mode is configured as disabled
stack
member 1 5
member 2 5
exit
configure

interface ethernet 1/g8
channel-group 3 mode auto
description 'ESX2_vmnic5'
spanning-tree disable
switchport mode general
switchport general ingress-filtering disable
switchport general allowed vlan add 20 tagged
exit

 

interface port-channel 3
description 'ESX'
hashing-mode 6
spanning-tree disable
switchport mode general
switchport general ingress-filtering disable
switchport general allowed vlan add 20 tagged
exit

 

  • Alexander_Busch

    1 Rookie

    •

    12 Posts

    2581

    0

    Posted October 28th, 2013 06:00

    Thanks to the good Support at DELL.

    The secret is you have to create a separate group on the switch for every esx-host. On the esx side you have the config with one lacp/lag group. But on the side of the switch you need 2 groups for two hosts. VMware should have made this more clear I think.

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    2581

    0

    Posted October 22nd, 2013 08:00

    Hi,

    Is port 1/g8 the only port in the port channel, or did you do a similar config for all 4 ports? Are the ports showing inactive on the switch or ESX side?

  • Alexander_Busch

    1 Rookie

    •

    12 Posts

    2581

    0

    Posted October 23rd, 2013 01:00

    Hi,

    thanks for your reply and your input.

    All 4 ports have the identical config, I should have made this more clear.

    The ports are inactive in the group on switch side:

    console#show interfaces port-channel 3

    Channel   Ports                         Hash Algorithm Type

    -------   ----------------------------- -------------------

    ch3       Active: 1/g36, 2/g30          6  

                Inactive: 2/g13, 1/g8

     

    On ESX Side the Host with the inactive ports shows an error of course. Like I said, if I remove one host from the config, the ports of this host are up, tested both Hosts, but with two hosts, one is always inactive.

    Thanks for your help and time.

     

    Best regards

     

    Alex

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    2581

    0

    Posted October 23rd, 2013 08:00

    Thanks for the additional information. Can you try to shutdown and no shut the ports that are showing inactive? It will show ports as inactive when they are not connecting. Is the VDS lacp mode set as active or passive? You might want to try the other mode.

  • 2581

    0

    Posted October 23rd, 2013 12:00

    i have the same problem and i cant solve. the 2 switch have stack and when i put

    the cable in switch 1 and switch 2 vmware dont work and crash my enviroment.

    regards

  • Alexander_Busch

    1 Rookie

    •

    12 Posts

    2581

    0

    Posted October 24th, 2013 01:00

    Already tried to shut down the ports. active / passive on VMware side has no effect. At the moment I have an DELL engineer who is working with me on that problem. I'll post an update as soon as I have new things or the solution to tell. I hope he finds a solution.

     

    Alex

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    2581

    0

    Posted October 28th, 2013 07:00

    Thank you for the update, this is useful information if anybody else runs into the same problem.