i am trying to connect 2 VLT pairs (in a squared mode, ie only 2 links between the pairs) running latest OS10 (pair of S4048-ON and pair S5248F-ON).
i created a regular VLT port-channel with LACP on each pair (same as for connecting server to a single VLT pair; exept that one side is active LACP the other passive LACP) and plugged cables, but the links go up and down.
i tried disabling spanning-tree (first on portchannel only, then for whole switch), but that did not fix the issue.
my main question is: is such a setup supported/possible? and if so, are there any things i should be aware of. ideally, if someone has configuration of a similar setup, that would be great.
DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
1517
0
Posted December 2nd, 2019 10:00
Hi, It may be possible, something similar to page 1153 https://topics-cdn.dell.com/pdf/smartfabric-os10-5-0_en-us.pdf