rcla2

updated

14 years ago

R

rcla2

12 Posts

0

3547

August 24th, 2012 04:00

VADP backups Windows 2003 R2 disks as non NTFS volumes.

Dear all,

I have an issue with a VADP backup of a Windows 2003 VM, backup is correctly performed but it is done as if it is a non-Windows machine, only VMDK files are backed up.

Save set specified is *FULL* then I expect to have an image level backup with file level restore capabilities and this is not the case, moreover no index are created, I am just able to perform save set recovery (not tested).

NetWorker server: Sun X4270, Solaris 10u10 on Intel, NetWorker 7.6.3

Proxy server: HP Proliant ML 570 G4, Windows 2008 R2 x64, NetWorker client 7.6.3.

NetWorker client: Windows 2003 R2 x86, 2 partitions, C:\ 16 GB Basic disk and D:\ 32 GB Dynamic disk.

These disks are not independent persistent disks.

The VM has not been upgraded from W2000 to W2003, C:\Windows folder do exists therefore esg122056 is not relevant.

The VM is backed up with a savegroup in which there are 19 virtual clients, no other case like this one to note.

I have also launched this savegroup via command line with –D9 switch and I did not found any useful information in the debug file.

Thank you in advance for your help.

R

1 Attachment

  • vipin_joy

    32 Posts

    1247

    0

    Posted August 28th, 2012 20:00

    Looks good to me. The Virtual machine only contains NTFS partitions, but does some reside on dynamic disks?. The VADP FLR option has not been qualified with dynamic disks and is not supported by Networker. Here are some of the limitations that are not supported by the Networker FLR option:

    • Virtual Machine OS containing GPT or dynamic disks. 
    • Virtual Machine OS containing uninitialized disks. 
    • Virtual Machine OS containing unformatted partitions 
    • Virtual Machine OS containing partitions without drive letters. 
    • Virtual Machine configuration with Virtual IDE Disk Devices (only SCSI). 
    • Virtual Machine configuration with independant disk mode.

    Do let me know if that throws more light on the situation.

  • vipin_joy

    32 Posts

    1247

    0

    Posted August 24th, 2012 22:00

    This right here is what we should be focussing on.

    80432:nsrvadp_save: Parser failed because of a non-NTFS volume inside the VM.

    80459:nsrvadp_save: Starting save operation of the non-NTFS Image.

    Can we have the output of the following commands

    1) Microsoft tool 'diskpart> list volume'

    2) Third Party tool 'MBRFix'. Extract the zip file to C:\ and from the command prompt run the following command.

    C:\>mbrfix /drive 0 listpartitions

    We can follow up once we have the above information.

  • rcla2

    12 Posts

    1247

    0

    Posted August 28th, 2012 05:00

    Hello,

    Please find below the output of both command lines :

    DISKPART> list volume

      Volume ###  Ltr Label        Fs     Type           Size     Status     Info

      ----------  --- -----------            -----      ----------        -------  ---------  --------

      Volume 0     D Data         NTFS   Simple        32 GB       Healthy

      Volume 1     R                       DVD-ROM         0 B          Healthy

      Volume 2     C                NTFS   Partition       16 GB       Healthy    System

    C:\temp\mbrfix>mbrfix /drive 0 listpartitions

    # Boot Size (MB) Type

    1 Yes     16370    7 NTFS or HPFS

    2             0         0 None

    3             0         0 None

    4             0         0 None

    Thank you.

    R

  • 1247

    0

    Posted August 29th, 2012 01:00

    Hi,

    I have reviewed the attached log and see that

    "Application information attribute VADP_DISABLE_FLR for client VM1.xxxxxxxx.com is set to default value of "No"

    Under Application information mark the attribute as YES and then run the backups.

    That should solve the problem

    Please update us with the feedback.

    Thank you

    ShivaKiran

  • rcla2

    12 Posts

    1247

    0

    Posted August 30th, 2012 00:00

    Hello,

    On the contrary, being able to restore files from an image backup is what I want, so I may be wrong but I am afraid that setting up this option to "YES" would not be helpful.

    Best regards.

    R

  • rcla2

    12 Posts

    1247

    0

    Posted August 30th, 2012 00:00

    Hello,

    Yes, D:\ partition is on a dynamic disk as I said in my initial post.

    So I guess I have to convert this disk to a basic one in order to have file level restore capabilities...

    R

  • 1247

    0

    Posted August 30th, 2012 02:00

    Hi,

    Yes, you are right. You cannot perform file level recovery from the image backup when the FLR option is set to Yes.

    So this has to set as No inorder to achive this.

    There are certian limitation which Vipin has already informed above.

    The main point here would be restore would fail when VM has a dynamic disk.

    So as you said convert the dynamic disk to a basic disk and then perform the restore and check if this works for you

    Let us know your feedback.

    Thank you

    ShivaKiran

  • 1247

    0

    Posted September 2nd, 2012 06:00

    If the VM contains dynamic disk, only the vmdk and the vm config files will be backup.  No index will be generated.  Once converted back to Basic Disk (require 3rd party tools, otherwise, it is a destructive process), it will generate the index.  vipin_joy pointed out the other limitation. 

    I assume you are not using hotadd mode.  If you are, then I don't recommend you use VADP on dynamic disk.  See VM kb 2006279

  • rcla2

    12 Posts

    1247

    0

    Posted September 3rd, 2012 01:00

    Hello,

    Yes you are right, I am using SAN transport mode.