UNSOLVED

mivancev

updated

20 years ago

M

mivancev

19 Posts

0

917

October 10th, 2006 02:00

LTO3 Tape on LTO2 Drive ? Is it possible ?

Hello,

is it possible to write data on LTO3 Tape with LTO2 Drive ?
And without losing capacity on tape ?

Regards,
M.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    313

    1

    Posted October 10th, 2006 02:00

    I don't think so. I know older DLT technology used to support such approach, but I didn't hear anything on that subject with LTOs.
  • amediratta

    2 Intern

    •

    2014 Posts

    313

    0

    Posted October 10th, 2006 03:00

    I have not heard of this being possible. LTO3 drive can read LTO2 tapes but not the other way.
  • smora1

    253 Posts

    313

    1

    Posted October 10th, 2006 08:00

    Hello Miroslav,

    No is possible because when LTO2 drives was designed, the LTO3 tapes were not in design yet. The compatibility always is from LTO3 to LTO2. On a drive LTO3 is possible to write a tape LTO2, the manufacturers say it. Even that, our advice is that many LTO2 tapes are broken by the drive LTO3.
  • jgwang

    19 Posts

    313

    0

    Posted October 10th, 2006 21:00

    Dear all,
    In my experience, you cannot write data onto LTO-III tape using LTO-II drive! You will get error while you try to do that!