There is no such feature in NetWorker that would help sanitize the tape. But you could however overwrite the tapes with junk data a couple of times to ensure that the original data cannot be retrieved. But again it might not be accepted as an ideal method to sanitize tape by any organization.
Labeling is a procedure as no standard tape drive will be able to read beyond a logical End-of-Tape mark which indicated the end of the valid data section.
As you work with HP stuff I assume that the HP Tape Tools have an erase feature that you can use.
crazyrov
6 Operator
•
1319 Posts
788
1
Posted December 10th, 2015 06:00
There is no such feature in NetWorker that would help sanitize the tape. But you could however overwrite the tapes with junk data a couple of times to ensure that the original data cannot be retrieved. But again it might not be accepted as an ideal method to sanitize tape by any organization.