encogneeto

updated

1 year ago

E

encogneeto

1 Rookie

•

4 Posts

•

2 Points

0

350

November 7th, 2025 12:56

U4323QE, KVM/USB switching not working

I have two laptops connected to my monitor and I'm struggling to get the KVM/USB switching working. The main issue is when I try to switch via the OSD I get the message "USB Switch function is only available when pip pbp function is enabled" despite having PBP enabled and in use.

My Connections are:
MacBook -> USB-C1
Lenovo -> (DP1; DP2)+USB-C2

Thanks!

(edited)

  • encogneeto

    1 Rookie

    •

    4 Posts

    •

    2 Points

    0

    0

    Posted November 13th, 2025 15:06

    Simply letting it sit over the weekend seemed to resolve the issue? It's working with the port replicator.

  • DELL-ChrisM2

    Community Manager

    •

    1989 Posts

    •

    9973 Points

    0

    0

    Posted November 7th, 2025 13:39

    Dell GHN (Get Help Now) chat technical support must verify the ownership and warranty status. Click the blue "Get Help Now" on the right to start a private live chat session. Share the private U4323QE Service Tag with them.

    Using pages 11/12/50/53/58 in User's Guide. Check the settings and setup below and retest =

    MacBook TB --> U4323QE 1.0 M USB-C to USB-C cable --> U4323QE #7 USB-C 1 upstream port


    Lenovo DP --> U4323QE DP to DP cable --> U4323QE #5 DP in port
    Lenovo USB-A --> U4323QE USB-A to USB-C cable --> U4323QE #9 USB-C 2 upstream port


    U4323QE Menu --> Input Source --> Auto Select  = Off


    U4323QE Menu --> Display --> Dell Power Button Sync = Off


    U4323QE Menu --> USB --> DP 1 assign to USB-C 2

     

    #IWork4Dell

  • encogneeto

    1 Rookie

    •

    4 Posts

    •

    2 Points

    0

    0

    Posted November 7th, 2025 14:07

    @DELL-ChrisM2​ 

    Thanks for the quick reply.

    There is actually a port replicator (Dell WD19) between the Lenovo and the U4323QE and I'm using a USB-C to USB-C cable for the WD19 to the monitor:

    Lenovo TB --> Dell WD19 USB-C to USB-C cable --> U4323QE #9 USB-C 2 upstream port

    Input Source is set to DP1; Auto Select and Auto Select for USB-C are greyed out
    Display Dell Power Button Sync is greyed out
    USB DP1 and PD2 are assigned to USB-C2

  • DELL-ChrisM2

    Community Manager

    •

    1989 Posts

    •

    9973 Points

    0

    0

    Posted November 7th, 2025 15:08

    Please test without the port replicator and post the results.

     

    #IWork4Dell