Given all the general Thunderbolt problems reported all around the web, I went with the Intel NUC11PAKi5, the one with a mini-DP 1.4 port.
Can confirm it works with the Dell U4021QW, running 5120 x 2160 @ 60Hz. The cable I am using is the "Cable Matters 8K Mini DisplayPort to DisplayPort Cable" from Amazon.
No special settings, just worked after a new install of Windows 10.
We tried reaching you on a private message asking for the U4021QW Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.
@boilface and @toddvernon the specs of the NUC mentioned in the first post suggest that this will work. Running the 5120x2160 resolution of that display requires a DisplayPort 1.4 interface. DisplayPort 1.2 is not sufficient. But if the specs of that NUC specifically indicate DP 1.4 support, then that should work fine, and yes the included TB4 cable would be sufficient. Note that I can't confirm this from personal experience, and in the tech world there's always the possibility of things not working even though they should, but the specs suggest it will be fine.
boilface
5 Posts
1120
0
Posted May 20th, 2021 07:00
Given all the general Thunderbolt problems reported all around the web, I went with the Intel NUC11PAKi5, the one with a mini-DP 1.4 port.
Can confirm it works with the Dell U4021QW, running 5120 x 2160 @ 60Hz. The cable I am using is the "Cable Matters 8K Mini DisplayPort to DisplayPort Cable" from Amazon.
No special settings, just worked after a new install of Windows 10.